How to Estimate Elastic Figure On Slogat: Step-by-step instructions for beginners

Seeing at least once in the life of cute and attractive bracelets, toys or animals made with their own hands it is impossible to stay indifferent. And the desire to figure out how to spare from the rubber figure will encourage the action to action. In order to understand all the nuances, you should stick to the existing magnificent master classes.

Seeing at least once in the life of cute and attractive bracelets, toys or animals made with their own hands it is impossible to stay indifferent. And the desire to figure out how to spare from the rubber figure will encourage the action to action. In order to understand all the nuances, you should stick to the existing magnificent master classes.

Unique Collection

Serious interest in the process and painstaking work will lead to excellent results. If you are guided by fantasy and preferably, you can create whole compositions.

Newbies are better to try themselves in weaving figures from rubber bands on slingshot, works will flow easier and faster. Having gained experience, you can try more complex and unique products of various shapes and sizes.

Amazes the abundance of the proposed options for the finished work of art. Using detailed instructions in which all the subtleties of work are explained in the understandable language, it will achieve enormous success in needlework.

Each person will find for itself something new and exclusive, animals, plants or various molds will perfectly decorate the interior of the house.

Important! The fascinating weaving from the shooter of the figure, which is close to moral, will enjoy the Master.

In general terms about fixtures

There are special devices for crafts of this kind or plastic molds. Some craftsmen adjust disposable cutlery and design on them.

To achieve the most productive results, you can take both whole structures and collapsible. The main thing is to work on the creation of figurines from the rubberry was simple, and the occupation brought pleasure.

The following rather comfortable and practical copies note from the analogs:

  1. The use of hook.
  2. The pencils.
  3. Ballpoint pens.
  4. Fingers.

The differences between the slingshot and the machine can be seen immediately, the first will be from 2-4 columns, and the second is at least eight. Manipulations will also differ slightly, but in general terms, all the techniques are similar.

Having understood with the most important stages, the machine on which everything will be done, there will be no special meaning. And with a certain practice, more complex structures will seem light and plevo.

Varieties of auxiliary documents

For beginner masters, video instructions for weaving rubber bands on slingshot will be useful. On a visual example, you can quickly figure out what is the matter and start creating your own achievements.

For someone, detailed descriptions are suitable in the form of text with interesting and high-quality photos. Comments and advice in them are always delometric and quite practical, so they must be listened to them.

Each of the options is good in its own way, if possible, it is better to get acquainted with both and then choose the right one. It is permissible to combine instructions, the image as weave from the gum of animals is located on the table, and they seek the clarification of incomprehensible moments.

Coordinated actions will help achieve large heights and high-quality crafts of varying complexity.

Special offer

In the market and in needlework stores, well-thought-out and equipped sets for creativity are sold. In the matter how to learn to weave from the rubber, such things have a positive impact on the development of skills. In the box you can find the following ingredients:

  1. Machine.
  2. Slingshot.
  3. Clips.

Additionally acquire multi-colored rings, they are packaged by bags that are very convenient to operate.

Tip! Be sure to pay attention to the price, cheap materials are robbed or deformed in the process. Such negative properties will lead to a bad mood and even an extreme anger.

Confuez, which occurred at the end of weaving from the rubber figurine on the hook, and will lead to the alterations of some sites. Nobody wants to face such problems, so the purchase of a scrupulously approach the purchase.

Varieties of material

As for the main billet, thanks to the development of equipment, quite interesting novelties began to appear in the office market. Such innovations include the structure of stretching parts.

All sorts of sparkles have been added to them, visually presentation of the chain chains from the rubber band looks very impressive. The use of transparent models adds elegance and style designs. For lovers, experimenting will be interested in the proposal with two-color rings.

Due to the extensive choice of color variations, to realize its most intimate desires simply. Bright and dull shades harmoniously emphasize any image, if using them in decoration. And the animals and molds look very natural and naturally with such materials.

The easiest master class

Thinking on what can be made from rubber bands in his first job, the answer will be obvious - it is strawberry. For the manufacture, you need a minimum of material and time to understand the techniques and get a gorgeous key chain, this idea will be as appropriate as possible.

In color features, the product is very similar to the real berry. And the volume of the finished composition adds attractiveness. For work it is necessary:

  1. Hook.
  2. Green blanks for tail.
  3. Red elements for base.

The first ring of the red shade should be twice twice and lay on the right side of the device. Guided by oddness to ride the remaining details already stretched on both ends. The twisted blank gently remove and position the center of the long lace. After these manipulations, the initial state is replenished.

Machine for weaving from rubber

It is necessary to be conveniently located on the table and continue the actions. Two blanks from the left speakers are partially closer to the top. For greater comfort, one first stretch, and after the second part over it.

The next pair goes after, and the lower loops will drop on the left half. A small tail is formed from the green rings, resembling a natural twig from the berries.

Having 5 minutes of free time

In his own manufacture, it is better not to rush, but if it was possible to construct a banana. Crafts from gum for weaving on a slingshot will not take much time and forces, and the received toy will entertain not one day.

If you work hard, you can easily create a whole bunch, which will not leave any person indifferent. Colors are used black and yellow, the contrast is so unique and harmonious that the finished design looks very believable and pretty.

The small tip and tail are made in dark, and the peel will be bright. Having understood how to make a toy from rubber bands for weaving, it is necessary to move to a direct process.

Recommendation! The auxiliary things will be both a slingshot and hook, each wizard itself is free to choose the most comfortable device for yourself.

Practical and fun

Small molds of animals, ice cream or fruit will take their place on the keys from the apartment. Motor vehicle owners can hang them on the rear view glass or on the front panel.

Schoolchildren will hold fun leisure during the manufacture, and then decorate the referring to the resulting work of art. How to knit from the elastic figurines in the first stages will explain the parents, and having understood in the actions algorithm, the young masters themselves will take care of work.

Some entertainment games or exciting travels around the apartment can be easily diversified by the introduction of such a plan. Favorite toys can be spectacularly decorated with cute key chains, for this you need to suspend the created 3D figurines made of rubber on the hand of a doll or an animal.

Gift at an important day

On the eve of the New Year will be appropriately designing a Christmas tree. After receiving an invitation, visit the birthday, you don't think about it for a long time. Having got a special set, you can safely start new accomplishments.

The volumetric rose will accurately cause the positive emotions of the birthday man. How to rinse from a rubber figure 3D easy to understand from available master classes and detailed instructions. After incarnation in the life of one flower, the desire to make a whole bouquet of beautiful bright plants will appear.

Tip! A beautiful Easter egg from harmoniously selected shades diversifies a basket and give the church holiday even more joy.

When meeting with the girlfriend, you can easily exchange such souvenirs and evaluate each other's fantasy. The attributes of the celebration are painted in different colors, so experimenting is over what.

The design with the name "Monster Teyl" will perfectly help in the implementation of the bulk figures. Manipulations will be easily and easily, and you need to be at a minimum.

Notes humor

Fans of jokes will appreciate the products in the form of a snake with a dried language. Such masterpieces immediately want to take in the palm and remember a little. A long torso allows you to wrap in cool all your fingers, such a lesson will pret to pretty and relax.

Having understood how to weave the sharp gum from the famous multiplication series can surprise relatives. Similar predators, unlike real, do not bite, and the game with them delivers a lot of positive emotions.

Use for all

Talking how to rinse from the elastic figure to your child, parents can very close to their favorite chad. And the young designer, in turn, will receive valuable skills in needlework. Children develops fine motility and attentiveness. The qualities will be very useful to Yuntsham in the future, and they will be grateful for it to the most native people in the world.

How to Estimating Rubber Figure: Photo Ideas for Beginners

Please make repost

How to weave the productIn our world, fashion exists on everything, including children's hobbies. At the end of the last century, girls and boys were made with an ecstasy and gave each other bracelets bracelets - "Fuenches". In recent times, one of the most popular children's hobby was weaving from multicolored small rubberry (it is called Lumigurians).

Technique description Lumigurumi

Children love and bright material for Lumigurumi, and simplicity of working with him, and a huge selection of products that can be made from a slumber on a slingshot, as well as on a special multi-row machine, a conventional kitchen fork and even on the fingers. Various animals that seem to be-coming will be revived, fruits, cars and other toys, not to mention traditional bracelets: the potential of multi-colored rubberry is truly unreasonable.

Together with children to weave figures from rubber bands on a slingshot with pleasure, moms with dads are connected. This is another opportunity to spend time with your child and create something together with him, and the ease of mastering the work makes weaving with a light and pleasant occupation even for beginners.

The set for their execution includes:

  • Machine - slingshot;
  • hook (plastic or knitting);
  • elastic bands;
  • A little patience.

Slingshot and Hook Tools

How to weave rubberA slingshot for weaving is sold in stores almost with each set of rubber. This is the most common tool for Lumigurians due to its compactness and ease of operation.

Mini slingshot is a plastic device With two "horns" and handle to hold the tool. The horns on one side are convex, which gives the form of a rubber band and protects it from twisting. From the other side, they are equipped with concave grooves, from which the gum is easy to pick up. During the operation of the slingshot is located on the horns up.

Also in the kit for Lumigurum, as a rule, a small plastic hook appears. It is very convenient for them to shoot elastic bands with a slingshot, the crying of it in the groove. In the absence of this tool in the set, you can use the usual crochet for knitting.

Several ideas of figurines for beginners

After preparing tools and materials, you can proceed to work. For beginners are instructions for wending the following figures:

  • banana;
  • Heart;
  • spiders;
  • star.

Banana Weaving Technique Lumigurumi

How to weave from rubber on slingshotDue to the fact that the banana has a very simple form, you can start learning the technique of Lumigurum from him. For its manufacture, except the slingshot and hook, you will need 20 yellow rubber and 4 black.

Take the hands of a slingshot , placing it with horns up and grooves to themselves. Now you need to take one black gum, throw it on the right column of slingshot and make three turns around it. Next, we take two elastic gums and we put them in turn on both columns, without twisting.

With the help of a hook, all three black hinges are dropped into the center of weaving. Thus, we get the tail of our future banana.

Again the yellow gums on the slingshot, this time four pieces. Using the hook, we throw off in the middle of weaving from each of the columns the two bottoms.

We throw four more yellow elastic bands from above, and four lower hook move to the weaving center. The last action needs to be repeated twice, not forgetting each time four lower gum into the center. After all these actions of yellow rubber, only two remains: they also need to put on a slingshot, throwing four lower ones.

The banana ends with another tail, so we will do it. To do this, throw two black gum on the slingshot, And the two remaining yellow letters in the center . We wear a last black rubber on the columns and remove both lower. Now we carry the remaining loop from the left column to the right. The lower loop of the same gum should be thrown off with the right column with a crochet, and removing the rest of the loop with a slingshot and tighten. Next, give the figure the desired shape and banana is ready!

Original Heart Pendant

Creating toys from rubberIf the banana turned out without problems, then you can make the figure more complicated: for example, heart. Such a craft can be originally decorated with a pencil or pen or attach it to your bag. For the heart, you will need 46 identical rubberies of any color. The classic version of the heart is made either of red or pink rubber bands.

As the last time, we take a slingshot into your hands, not forgetting that the grooves of the roar are located in our direction. We wear the first gum on the right column and twice wrap around it.

Next, the heart will be placed by pairs of rubber Therefore, for both its halves, we prepare for 11 pairs, only 22 pairs.

One pair of rubber bands put on both columns of slingshot and throwing two loops on it with the right column. We throw two more gum on the columns, and the two bottoms will move to the center. For such an example, 11 pairs should be absorbed. After that, from the left column of the slingshot, we will remove all the loops and slide on the right side of the column what happened. The first half of the heart is ready!

If the hook before it was not used, then now he will surely need . It should be started in the upper loop from the first pair, which was braided. This very looping is thrown on the left slingshot column, and on top on both columns put the next pair of rubber bands. The bottom loop from the left column is thrown into the middle and continue to weave the second half of the heart according to the first. By the end of weaving, one last elastic band remains. It must be put on both slingshot columns, and all the lower loops take off.

Next, from the left column of the slingshot we move the shelling of the gum to the right, and that loop, which turned out to be dropped at the bottom. Remove the last looping with a slingshot and tighten well so that the aircraft did not crumble. It remains to give a figurine shape of a heart and you can decorate her favorite handle.

Small realistic pack

How to learn tolereFeature of this interesting figure From which you can make a decoration for a handle or a pendant for the phone, in the fact that the gum is cut to imitate spider paws. Consequently, tighten such a toy you need as much as possible.

To create a spider, except traditional tools, we will need 1 yellow gum (for a ring) and a few black.

We hide a yellow rubber on the right column of slingshot, while the first black turn around the left four times around the left. The next black gum engages eight for both columns.

Now we associate in pairs of six black gum and put them on the working machine. From the left column, two loops remove down, then carry two loops on the left column with the right.

The extreme loops remove in the middle of weaving, and then turn the slingshot with sideways and gently cut the manicure scissors left on the right column rubber - these are the paws of our spider.

Now it can be removed Over the loop on the left slingshot column - It performs the function of the head. It remains to round the head, straighten the paws and hang a little animal on the ring.

Volume five-pointed star

Crafts from rubberUnlike previous ephemeral crafts, a five-pointed asterisk is quite massive and perfectly suitable as a suspension for the bag. For her, there will be elaborates at least three different colors - it will make a figurine more fun. Do not forget about the hook and slingshot - our main working instruments.

Let's show the course of work on the example of a white star supervil: for weaving use blue, blue, white and purple colors.

We put on the right column The machine is a blue elastic, twisted in four turns. From above on both horns we put a couple of blue gum. Blue Peels, which came on the right horn, remove and place in the center of blue. Then we again stretch a pair of blue rubberries on both slingshot columns.

The lower two covers of blue color are discharged into the center of weaving both on the left and on the right side. We wear two white gums on both horns. We reset two blue loops from the left column in the middle, and two white turns from the right horn gently put on the left.

We carry out similar actions and for the right column: again two white on both horns, two blue loops - to the center, and two white turns on the left side throw on the right.

Now the turn of the purple rubber band came: putting them on the horns, discard all the loops from the machine on their center. Thus, we get a billet of one of the rays of our sprocket: carefully removing it on the second hook, We are taken for weaving the next workpiece .

When all five blanks are woven, we place them on the horn of the machine for purple gums: let's say three rays on the left and two - on the right column.

How to weave your handsFrom above on both columns we put a purple gum and gently transfer all the billets of rays into its center. It will be more convenient to place them on the opposite side of the machine.

Purple loops are transferred to one of the machine horns, then we drop the lower loop on the top. The remaining purple loop should be carried out in turn through double rubber bands at the base of the rays until it disappears. After that, you can provide one of the tops of the rays with a ring with a ring and hang an accessory to a bag or backpack.

Now, having mastered how to evil Figures made of gum on slingshot For beginners, you can move to the creation of more complex products using, for example, a multi-row machine. Because the art of Lumigurumi is very popular, on the Internet you can find many step-by-step instructions and videos, which are easy to learn inspiration for the manufacture of new masterpieces from merry multi-colored rubberry.

Originally Posted 2018-03-19 08:56:21.

Rubber figures

Weaving figures from Rainbow Loom Bands rubber bands are a very fashionable modern lesson. However, not everyone knows that from the rubberry, not only bracelets but also rings, earrings, clothes for dolls, fruits, animals, phone case and much more ... In this article, we learn how to rinse from Rainbow Loom Bands strawberry and wasps.

Set of rubber

Strawberry from rubber non-machine

Strawberry from rubberry

You will need: Red, green, orange, pink, blue rubberry, hook.

Master Class

  1. Take a red rubber and wrap the hook in three turns.
  2. Start two red rubber bands through a wound gum.
  3. Put on the hook hook.
  4. Through the loops, two rubber bands are red, which is on the hook.
  5. Repeat five times item number 4.
  6. Bottom covers put on the hook.
  7. Take two rubber bands in red and stretch them through those on the hook by continuing knitting.
  8. Repeat item 7 four times.
  9. Put on the hook bottom gum. Berry ready!
  10. Two times with a gum of green color.
  11. Thug two green gum through twisted.
  12. Make three such billet on the hook.
  13. Stretch green gum through leaves and berries.
  14. Remove the berry and fill a rubber.

Strawberry from Rainbow Loom Bands Rainbow!

Bee from rubber without machine

Bee from rubber

You will need: Yellow and black rubberry, hook.

Master Class

  1. Put on the fingers of the eight black rubberry.
  2. Put on your fingers two yellow rubber bands.
  3. Reset the eight in the center.
  4. Dress two black gum.
  5. Relieve yellow.
  6. Alternate black and yellow elastic bands to the desired body size of the bee.
  7. Rubber gum for one finger.
  8. Transfer the figure to the hook.
  9. Take a pupil or black and white rubber for bee bee.
  10. Stretch it through the rubber bands on the hook.
  11. Check, tighten and cut the gum into two parts to get two mustache.
  12. Insert the hook into the bee body and thread two white rubberbers, one above the second below is the wings of the bee.

Bee from Rainbow Loom Bands Rubber is ready!

If you with ease it happened to weave strawberry or bee, now you can go to more complex lessons. Glowing Coca-Cola from rubber on this video lesson!

Rainbow Loom Bands Rubber Sets can be purchased in stationery shops at an affordable price or order online. Weaving perfectly develop the motility of the hands and the creative imagination of the child!

Figures made of rubber: weaving on slingshot and machine

Weaving figurines made of rubber band - a very popular view of the needlework among adults, and especially among children. The presence of a large number of multicolored rubberry, as well as a special slingshot, a large rainbow machine, Monster Tail compact, or even a conventional plug allows us to weigh the most unusual things, toys, figures that will not only come in everyday life, but also become an excellent memorable gift. . We have already considered ways in detail Weaving from rubber bracelets of different complexity . Another extensive subsection of this art is weaving from the elastic figurines.

Here, too, you can enjoy a variety of knitting ways, try working with different tools and weaving schemes of different complexity. The larger plus of this type of needlework can be considered the possibility of instant immersion in the process, because weaving from the gum does not require greater experience or special knowledge, here the main thing follows the instructions and receive pleasure from the process. Therefore, let's try to figure it out in more detail in each method of weaving figures from the rubber, in parallel to study some popular methods and weaving schemes completely free.

Figures made of rubber: weaving on slingshot and machine

How to weave from rubber figurines on slingshot

The slingshot is one of the main tools with which the beginner masters of weaving from rubber, and professionals. Making figures like on machines, so without them it turns out quickly and simple. Rogat's weaving is considered one of the easiest and most affordable methods among the variety, since only two columns are involved in the work. Therefore, it can be considered a preparation for more complex knitting methods, for example, on Rainbow Loom or Monster Tail machines.

Simple figures for beginners

To begin with, it is worth mastering simple figures from the rubber. Weaving for beginners provides ways to knitting on the fingers, forks, two chopsticks and many other things, and most importantly - on slingshot. Newcomers should not be afraid of difficulties, since most of the simple products from the gum is made according to the standard scheme: the first step, the second step, repetition of the second step before receiving the necessary form, the completion of work.

Ball-jag without machine

Figures made of rubber: weaving on slingshot and machine

Such a simple figure as a ball will come in handy to play with pets, for example. Consider closer how to make a beautiful ball from the rubber band with your own hands without machines.

Materials for work:

  1. cotton disk / piece of wool;
  2. 200-250 gum of one or more combined colors.

Progress:

Bend the disc in half, and then once again in half, famil the disk so that the ball is like.

Figures made of rubber: weaving on slingshot and machine

Take the first rubber, and turn it around three times around the disk, every time turning the middle eight. As a result, three rows should turn out. The second also turns into three rows, but already across the first gum - to get a cross.

All subsequent gum should be placed on the empty velocity of the cotton disk. We continue to wrap your wool with rubber.

In the process of weaving the jumps, do it yourself from rubber There is one trick: The greater the number of revolutions of one elastic band around the base, the more "jumper" it will be as a result. This means that it is worth tightening every rubber tossing to get wrap more tightly.

Figures made of rubber: weaving on slingshot and machine

When the bulb will become more, the gum can be worn without twisting. Thus, we continue to work until the stock is completed. It is important to remember that the process itself is quite a long time and takes a lot of time, but this is a great way to fill the hand before working on more serious models of figures.

Banana Keychain on Shot

Figures made of rubber: weaving on slingshot and machine

Another uncomplicated subject, which is under the power to tie beginners - even kids. By the way, figurines made of vegetables in the form of fruits are very popular. Knit them easily and fun, and the biggest advantage is the ability to fill your hand for weaving more complex figures.

Materials for work:

  1. slingshot;
  2. knitting hook or plastic hook made of rainbow set;
  3. Black gum - 4 pcs.;
  4. Yellow gum - 20 pcs.

Progress:

Take a slingshot so that the notches are turned to you. Put on the first elastic rubber on the right column as follows: it needs to be carefully wrapped around the column three times.

Next, on the columns, you turn the two elastic bands of yellow, in no way twisting them.

Now you need to take the hook and throw off all three turns of the black gum on the middle of the yellow rubber, according to the photos below.

On top it is necessary to wear four yellow rubber bands.

Carefully picing the two lower loops, on which there are already black elastic bands and move to the very top, cross through the slings of the slingshot and release them to lay on top of all put on the slingshot of the rubber band.

I put on the slingshot exactly four yellow gum, as in step 4, so that they lay straight - one above the other.

We continue to throw off the gums with the help of a hook, translating them through the frame columns. Exactly the same actions need to be repeated and even twice, so that the oblong body is our future toy.

The last time you need to be limited to four, but with two yellow rubber bands for which you need to wear the previous four.

Figures made of rubber: weaving on slingshot and machine

Next you need to wear two black gum on the slingshot.

We throw off on the black or brown gums are the very two yellow, which was put on the end of the weaving of the body toys.

It remains to throw another one, the most recent elastic band of black color, and then throw two lower on it, and to secure work. But first we throw off both black hinges of the same gum on one side of the slingshot. Next, it will only be left to stretch the bottom loop, with the help of the same hook through the upper, and remove the toy from the mini-frame. Little banana from rubber band is ready!

Figures made of rubber: weaving on slingshot and machine

Strawberry key chain

Figures made of rubber: weaving on slingshot and machine

Babies and adults who are just beginning to master the art of weaving from the rubber, will love the process of making different key chains in the form of bright fruits. That is why it is worth paying attention to such a funny figure like this strawberry.

Materials for work:

  1. slingshot;
  2. rubber bands red;
  3. Green gums;
  4. hook.

Progress:

On the right side of the slingshot we put in three turns rubber red. We throw a double red rubber on both kolyka. We throw off the previous hotels on it. We again ride two gum.

Figures made of rubber: weaving on slingshot and machine

We throw off the lower right loop to the center. We throw the left edge of the gum on the right peg. We ride two red rubberbers. Remove the left loop.

Figures made of rubber: weaving on slingshot and machine

Repeat the previous steps: We ride two red rubber bands and remove the left loop. Remove the top pair of loops on the right side of the slingshot and put it on the left. We ride a pair of red rubberbers. We throw off the right upper double gum in the middle.

Figures made of rubber: weaving on slingshot and machine

Upper red loop put on the left column. We put on a red gum and remove a loop on it from the right edge. Now we take a double gum of green and put it on a slingshot. Upper red rubber band from the left edge removed on the green. The left loop of the green color is put on the right peg.

Figures made of rubber: weaving on slingshot and machine

Wear a green pair. We remove all the loops located on the left side of the slingshot. We put a single elastic band on both cavals. We remove all the loops of the green color on it. Crochet neatly remove two hinges. Tighten the loop by throwing one elastic band to another. Keychain made of rubberbers ready.

Figures made of rubber: weaving on slingshot and machine

Animal weaving

A separate type of art can be considered weaving from gum of animals, as they can play a role not just toys or keychain, but also a fun decoration for pens or pencils. Weaving on animal slingshot is an entertaining process that carries everyone without exception.

Cute Owl

Figures made of rubber: weaving on slingshot and machine

Let's try to apply such a cute symbol of knowledge from rubber with slingshot. It will be great to look as a keychain or decoration on the handle of the locker.

Materials for work:

  1. slingshot;
  2. hook;
  3. scissors;
  4. Golden gum - basic body color - 44 pcs.;
  5. White rubber bands - abdomen - 8 pcs.;
  6. Orange rubber bands - paws and beaks - 4 pcs.;
  7. Black gum - eyes - 2 pcs.

Progress:

Weaving owls will be performed in two stages. First, we prepare elastic bands in the form of a scheme for the body of the owl and we are wearing it, and then move on to your head, as shown on step-by-step photos below.

We start with golden color. The first gum we throw in three turns on the right column. Then we put on two redheads for two pins.

The initial of the three turns throw in the center.

Then we free the right column, transferring the gum to the left side.

Now let's make a paw owl. One orange rubber band turns four times on the right side of the slingshot. We put two redheads usually.

Orange of four revolutions descend on gum. From the left column, we send the lower two pairs to the center so that the orange remains to the right of them.

We again throw two redheads, and the lower ship send to the middle.

Then the second pair of redheads are put on two columns, and the lower will send them to them.

And the third pair will throw on both parts of the slingshot, the lower reset to the center.

We transfer rubberbies from the left side to the right.

Enter the hook to the initial elastic band of three revolutions and thump it on the left column.

Figures made of rubber: weaving on slingshot and machine

Now we will weave the belly owls from white rubberry. Throwing the first two white gums, send a triple rubber in the middle.

We wear a second white pair similarly to the previous and lower white we descend from columns.

We are also we relaxed and the third, and then the fourth pair of rubberry.

We move on the left side of white rubber bands on the right.

We once again introduce a hook inside the initial triple gum and put it on the left pin.

We ride red rubber bands again. We put two on both columns.

Three turnover from the left will send to the center.

We transfer left rubberry to the right, and on the left pin they reach 4 turnover of orange gum.

We throw a pair of red and orange descending from the pin.

Figures made of rubber: weaving on slingshot and machine

From the right column throw two top pairs of redheads in such a way that the orange remains left.

We still put two redheads, and the previous ones will send to the center.

Again a couple of redheads wear and descend the previous ones from both columns.

The next pair also put on the previous reset from the columns.

Using the next pair of red rubber bands, connect all together. Owing a couple on both parts of the slingshot, all the lower gums with slingshot we send in the middle of weaving.

Then go to weaving the head of the owl. Prepare rubberry, spread in the form of a scheme, as in the photo.

We put it in the usual way to a pair of reds from the right row of the scheme, the bottom drop in the middle.

Then we put another pair, and the bottom will send the center again. We transfer left gum to the right.

Now we are wearing the Glazik Owl. Black rubber thunder in four turns on the left pin.

Again, we usually put a redhead pair and remove the black 4 turns on it.

And also send both lower pairs on the right side, but so that the black was on the left.

We throw two more red rubber bands, and the lower will send the bottom to the middle.

Figures made of rubber: weaving on slingshot and machine

Let's free the left column, transferred to the gum from it to the right.

The hook we introduce into the loop with which we started weaving the head and throw two orange on the hook. We shy through the loop and the second part also thump on the hook.

And already from the hook we descend the orange on the left pin.

We put on both columns a couple of redhead and remove orange rubberries on them.

Transfer from the left side of the gum to the right.

The hook is again introduced into the loop from which they started. We throw a pair of redhead on the hook, pull one side, and we wear the second on the hook.

We descend the rubber band from the hook on the left column.

Again on both columns we wear two red rubber bands. Two pairs of redheads we lower in the center of weaving.

On the right column we cling the upper two gum and transferred to the left. Black single elastic rubbing in four turns on the right side of the slingshot.

We put on a pair of redhead on both columns and pull black turns.

Next throw away from the left side of the slingshot all the rubberry so that the black was to the right of them.

Figures made of rubber: weaving on slingshot and machine

We continue red. Owing a couple, the previous ones send to the middle.

Now we connect all the gums on the slingshot. We put one redhead on two columns. All gums with slingshot will send to the center.

We carry one of the rubber on the column next door. The bottom of them descend to the center. Prettyly tighten the loop.

Now let's make tassels of our owl. We introduce a hook to the upper left loop of the head and shifted through it alone red.

We will make a loop that already known to you.

Similarly, we make on the right side.

Now take scissors and pulling out each of the prepared rubber bands, cut about half. Owl made of rubber glasses.

Figures made of rubber: weaving on slingshot and machine

Bunny

Figures made of rubber: weaving on slingshot and machine

Another cool pet, which can be worn with a bundle of keys. The keychain-bunny will be able to follow the following weaving instructions from the rubber.

Materials for work:

  1. slingshot;
  2. Hook for weaving;
  3. Yellow rubber bands - 58 pcs.;
  4. Black rubber bands - 3 pcs.

Progress:

Snacks hold in hand recesses in pins to himself so that it is comfortable to capture the crochet of the rubber.

On the right side, we screw one yellow gum, wrapped it three times, and then we throw it on both pins.

The first rubber (3 turn) is sent to the middle and put on the next pair.

Now the previous rubber bands are descending into the center on both sides and another couple throw on the columns.

We relate, throwing down the bottom, and then put on the fourth pair of yellow.

By throwing down the lower once again, the blank by transferring to the right column, and the hook we introduce into a triple initial gum.

We descend the triple from the hook to the left pin, and then we put on a couple more (this is the first pair of the next billet).

Letter a triple rubber in the center with each of the sides, and then throw two more yellow rubberry.

Previous ship to the center with each of the parties, and then throw another two yellow gum.

We again descend the lower (previous) elastic bands, and then transferred and the second billet on the right side of the slingshot.

We find a triple rubber and throw again on the left pin.

Figures made of rubber: weaving on slingshot and machine

The following billery makes the same method, wearing 4 pairs of rubber band in the fishe tail technique.

Bunny's body is almost ready, it remains only to connect woven chains. To do this, we will put two yellow and all elastic rings to send them.

Now we proceed to weaving the head of the bunny. We put two yellow usually, and the previously discovered.

Another couple of yellow throw on the slingshot. Previously throw off, and the gums on the left side are transferred to the right.

We make a glazing bunny. On the left side of the slingshot turn around one black one. And then two yellow put on both columns.

We descend three turns of the black on the left and both lower pairs of yellow on the right side, and then transfer the gum on the left side.

Now weave the ear bunny from yellow rubber. We start with the winding of the rubberry three times on the right column. And then put the first pair on both columns.

Three turns descend to the center and we continue to be a "fish tail" to weave two more pairs of rubber.

We connect the elements by throwing another couple of yellow. Throw all the lower gums so that the ushko was right.

We continue weaving your head. The hook we introduce into the loop from which the heads started and we throw this loop on the left side of the slingshot.

Figures made of rubber: weaving on slingshot and machine

And then we throw a couple of yellow.

We descend the loop on the left.

Now we wake a black elastic rubber in 4 turns on the right column.

We put on a couple of yellow on slingshot.

We descend the black gum and the previous yellow.

We throw another pair of yellow rubber, and send the previous ones to the center.

We transfer gum on the right side.

The hook again we get into the loop, with which the bunny's head began to make and put on the left pins.

We inlets a couple of yellow "fish tails" and make a second eye.

Black wind at the right column, and then throw a couple of yellow on the slingshot.

Figures made of rubber: weaving on slingshot and machine

We descend black turns and two pairs of yellow on the left side.

Overlaying left rubberries on the right side and weave the second ear.

On the left side of the slingshot, we screw the yellow elastic rubber, and then weave the same as the first ear. We relate three pairs of rubber, and then connect the items with another one for a yellow pair.

We descend on the left a pair of rubber, and on the right 3 pairs of the upper yellow.

We attach the last single gum, which we send all the lower gums from the slingshot. We carry one of them to the adjacent column, and then lower down. Pettopuschka tighten and remove the figure with slingshot.

Replacing your eyes, ears and pull Rovenko nose. Bunny ready.

Figures made of rubber: weaving on slingshot and machine

Video lesson

It is difficult, but it is interesting, maybe when creating figures from a rubber band with a slingshot! For example, if you choose such an interesting method of weaving figures from the rubber, as in detail is shown in this video lesson. A master class on knitting a figure of another bunny will help create a toy that will enjoy the kids, and can also become a memorable gift for adults.

Video lesson - weaving from rubber figurines on slingshot:

How to weave the figurines made of rubber on the machine

Weaving figures on the machine - a very exciting process that allows you to embody the most extraordinary and complex ideas of the masters of this type of needlework. Rainbow Machine will help to make toys, things, accessories and much more from simple gum. But simple figures are obtained using machine tools interesting and beautiful. For example, you can tie toys in different techniques - from the simplest weaving to Lumigurumi, as well as interesting volumetric key chains from a rubber of varying complexity. We will analyze several interesting examples in detail.

Brecks

Weaving brackets made of rubber bands - a very popular appearance of needlework among the younger generation. It is a simple and pleasant way to make yourself and loved ones cute memorable things that they can always wear with them.

The Eiffel Tower

Figures made of rubber: weaving on slingshot and machine

Let's try to evan such an uncomplicated tower in the form of the letter A with the help of a rainbow machine.

Materials for work:

  1. rubberry of one or two colors - up to 40 pcs.;
  2. machine.

Progress:

We put on the working surface of the machine by turning the excavation from ourselves, and put the central row to put a little closer than two extremes.

Figures made of rubber: weaving on slingshot and machine

IMPORTANT: every time we will throw three elastic bands at once. We need to throw three times three times on the extreme rows, capturing four columns in each row. Next, you will need to use two pieces of Rainbow Loom every time. Five steam should be thrown on the left extreme row, we throw another pair from the extreme to the central row. On the right side, we will only throw three pairs of rings, after which 2 more rings throw from the extreme on the central one.

Figures made of rubber: weaving on slingshot and machine

After that, you need to connect two steam rooms along the central row, then put on a couple of centr. The next ring twice is twice and continue the center. We continue to master how to weave the key chains from the rubber.

Figures made of rubber: weaving on slingshot and machine

Rozhitsa

Figures made of rubber: weaving on slingshot and machine

A simple bulk figurine with a good mood that will deactivate the set of keys.

Materials for work:

  1. Yellow rubberbers;
  2. black gums;
  3. machine;
  4. hook.

Progress:

Take the machine. Place the rows in such a way that the average row is on one column above the lower and top.

The emoticon weave with two rubberbers, that is, we do not wear one yellow elastic on the columns, but two. So the product will be more durable. So, we dress elastic over the first middle row column, connecting it with the bottom and upper side.

We add to the first and third row to 4 pairs of rubber.

Then on the middle row - 5 pairs.

We combine all rows with two pairs of rubber bands.

On the extreme column of the middle row (6 in the account), screw the gum in three layers. We prepared the foundation.

Now we need to make the emoticon acquire a rounded form. To do this, take free columns on the machine. Dress on four of them three pairs of yellow rubber bands. At the end, secure one elastic band. Duplicate.

We throw the rubber bands from the extreme column to the previous ones.

Figures made of rubber: weaving on slingshot and machine

We remove the pre-prepared stripes and wear them on 1 and 5 top row columns. And the second billet on 1 and 5 columns of the lower row.

Now proceed to weaving the eyes. Take two black elastic bands. Wrap them around the hook three times.

Grind eyes through a yellow rubberry, and throw on the first columns of the upper and lower row.

Now a smile. Take another black gum. Take it on the second columns.

We relate the upper and lower row.

Then the middle row.

Fix the product with a loop.

Gently remove the emoticon from the machine. Keychain made of rubber bands.

Figures made of rubber: weaving on slingshot and machine

Lumigurum's video lessons

Figures made of rubber: weaving on slingshot and machine
Lumigurians created from rubber with hook.

An interesting name of this method of knitting implies the possibility of weaving toys from the rubber bands in a special way, similar to the specifics with Japanese amigurum - knitting with knitting needles or crochet.

Figures made of rubber: weaving on slingshot and machine
Knitting amigurum, similar to weaving from gum Lumigurumi.

Figures made of lumigurum rubber, associated with the help of a hook, are also obtained by volumetric, and the canvas as a result remains dense, ribbed and structural - excellent "development" for fingers of very small children! If we are taking the figures in this style on the machine, then the result is less volumetric items that can not be fueled by a syntheps - everything will depend on the selected master class.

The method of weaving the beloved by all minion from the gum in the technique of Lumigrumi on the rainbow:

Detailed instructions for knitting a volume elephant from rubber on the machine:

Milestovy Volumetric figures of rabbits, which are obtained from the rubber with the machine :

Some like weave not figurines, but flat Frescoes With silhouettes of figures. For them, this way of knitting shown in video is suitable:

That's great The method of weaving the bulk beautiful owls, with one  Only hook . A detailed video lesson will help to cope with the task even to craftsmen and masters with a little weaving experience.

Another Method of knitting with Lumigrumi crochet, this time a funny unicorn :

Video lesson in the style of "Monster High"

Very popular among young people is weaving from rubber in the style of Monster High. Often we are talking about weaving bracelets in the cartoon style Monster High. But also you can often find instructions for knitting certain items of clothing in the style of the main characters of the cartoon, which are suitable for pupae. Some masters even fly from the gum of the heroine themselves. Weaving from the rubber on the Machine Machine in the Montristian style is usually performed in dark and bright contrast tones.

Video Lesson - Figures made of rubber on a Monster High Machine:

Here is another master class on knitting from the elastic band on the machine of another figure from the cartoon:

Watch us in social. Networks!

How to weave the figurines on the machine on the machine and without it. Weaving figurines made of rubber bands, video

Avatar of the author Elizaveta Rumyantseva

Elizabeth Rumyantsev

For diligence and art there is nothing impracticable.

The whole world captured a new fascinating hobby - weaving from rubber bands with Rainbow Loom creativity, which originated in America. And it does not surprise, because such a simple, available material gives a lot of opportunities. When the young masters and craftsmen have mastered the creation of a variety of phenoshek, they are interested in how to weave the figurines of the figure? Funny toys, key rings you can do on the machine, fork, flock, slingshot, fingers, rainbow weaving machine or monster Tale. How to do you learn from the master classes and video for beginners below.

Step-by-step instructions and schemes for weaving figures from rubber

If you decide to do a needlework with rubberbers, then the master classes and video and video will help you master new techniques, schemes, patterns, which will significantly expand your capabilities in this hobby. Weave the figurines from the rubber band is not as difficult when there are all the necessary materials, tools, as well as visual instructions. The main device for weaving is the machine, which is a real estate platform with plastic nozzles, which the gumpers are worn during the work.

If you do not have a weaving machine at hand, you should not be upset, because you can rush a fun figure without it. Below are instructions for creating suspension, keyfobs, animals, such as hamster, koala, deer on a mini-car Monster Tale, hook, slingshot, forks, and in some cases their own fingers will need, which without additional tools will allow you to create a unique craft. If you work with a crochet, then experienced needlewomen advise to get a knitting metal, since it is much more convenient and easier to work with it.

Weeping "Ice Cream" on a small machine Monster Tale

Figure ice cream from rubber

By this master class, you will teach the face of ice cream from rubber. It is a popsicle on a stick. To work, you may need three colors of the rainbow: one for a stick, the second for the lower layer, symbolizing the creamy layer, the third for the base color of ice cream. We have a mini-machine so that the point is left. Weaving will be carried out on the three upper and lower spikes. Step-by-step instruction:

  • We throw in the middle, twisting two times eight, that is, in three turns, the color of the colors of the sticks. Following two central columns cling a couple.
  • We throw off the one that twisted three times, to the center through the top. We put the following two.
3.
  • We throw off the bottom layer to the center. We cling two more, again transferred to the middle to the middle. We take the color of the layer, clinging for the central pegs. We throw off orange.
  • Horizontally at the bottom we throw one white. We add from both edges of the iris in four turns.
four
  • Right and on the left cling pair. We throw off to the center accessed in four turns and horizontal. We cling the main color for three pegs. Vertically cling to a pair.
  • We throw off the pink horizontal, all white. We cling one along the bottom row, two vertically. We remove the horizontal, the entire bottom layer.
five
  • We twice twice by the described sequence. For the third time, we leave the center empty, and horizontal twist into two turns.
  • We carry all the iris on the central pegs. After clinging alone, we throw all the last on it. We make a loop and remove the finished popsicle.
6.

TitleIce cream from Rainbow Loom Bands. Lesson 186 | Ice Cream Rainbow Loom

Enderna figurine from the game "Menekraft" on the machine

Enderman's figurine

This workshop clearly shows the weaving of Enderman's figures from a popular computer game called Maincraft. This hero is completely black with violet eyes, but for your craft you can choose any other colors. Pick up a carbine or clasp for a key chain to hook the finished product. The machine is in such a way that the open sides look at you, and the central row slot a little over extreme. Phased instructions:

  • We cling to a pair of the head of the toy hero, as shown in the photo.
  • We make eyes.
8
  • We do neck, shoulders on the right and left. You need to sprink your hands with a pigtail from seven pairs, they see them.
  • We form the body as shown in the photo.
9
  • On the right and left side, we throw elastic bands, forming legs to the very end, where we screw in four turns to secure weaving.
  • We cling the triangle on the body, fasten the workpiece. Slip the fully filming, capturing the hook of the bottom layer, turning it on the forward running pin. On the head we make a loop, we take it for it and remove from the machine. We cling fasteners.
ten

TitleEnderman Minecraft (Enderman Minecraft) Rainbow Loom. Lesson 54.

How to Eust "Heart" without a machine, only on forks

Heart figurine

To spill a heart figurine, you need to choose the appropriate color of the rubberry. The finished product can serve as a key chain, hairpin, brook, or a pleasant surprise for a loved one. To work, it is necessary to make four fork together together: first we connect two at the top near the teeth, and then these couples apply each other, connect on the knobs of scotch. Instructions step by step:

  • For the fourth teeth, we cling the first iris, twisting four times. From above, we throw one more for a couple of opposite teeth.
  • We throw off to the center twisted into four turns. For the top three clinging alone horizontally, twisting the eight, for the third, fourth and fifth cling pair. Lower layer and horizontal throw off.
12
  • We cling two pairs for five teeth, as in the photo.
  • We throw in a pair, throw off the horizontal and last row.
thirteen
  • We cling horizontally for seven teeth, paired for opposite. We throw off the horizontal and last layers. We repeat again.
  • We liberate the fourth teeth, carrying the loops on the third and fifth. We put horizontally on three teeth on the left and right, vertically for opposite. We throw off the horizontal and last layers.
14
  • We liberate the first, seventh, third and fifth teeth. We relate only on the second and sixth. Remove the figurine, hinged hide.

Make a ball of rubber on your fingers

Figurine ball from rubber

In this lesson, you will learn how to create a ball card or a bulb ball. Choose that the color of the rainbow, which you like more. The machine, the hook in the work will not need, you will need to prepare a cotton disk, cotton wool or a crumpled piece of paper for volume. Instructions stages:

  • We fold a cotton disk - this is the basis. We throw the elastic band by twisting as many times as elasticity allows.
  • Across cling the following. We continue to tie there, where empty places remain. The more turns of the gum do, the more elastic ball will be.
16
  • We continue to wind the iris, picking up the desired size of the jump. Gradually, you can throw gums with fewer revolutions, and at the end - at all.

TitleBall-joy from Rainbow Loom Bands gum. Lesson 166.

How to make a toy "angry birds" on the hook

Angry Birds figurine without machine

For this instructions, you master the creation of figures from the game called "Angry Birds". For it, it is necessary to use a hook, four colors of rubber band: two for feathers, one for beak and eye. Potion instructions for the manufacture of a flat beast:

  • We put on, twisting three times, white. Follow the cling of a couple in one direction, we throw off the first gum on it, we throw the other side. It will be a beak.
  • We cover the other color four times, throwing it into one, twisted eight.
eighteen
  • We add another link, we carry white so that oranges are between them.
  • We throw off everything for a couple of red. Add another link. Hound white four times, on top - black. This is the future eye. We carry the edge of the previous chain so that the stristed are inside. Add one white, two red links. We skip the tip through the previous one, add a red pair. We throw off everything, excluding the last link, to the next red.
19
  • Add another link, remove all loops of weaving, turn over and put on the hook. So we ride the second strand.
  • We remove all the loops on one red couple, make a loop, tighten.
20

TitleFigures made of rubber. Angry Birds figurine from Rainbow Loom without machine

Weaving suspension "Banana" from rubber bands with a slingshot

Banana figurine

According to this scheme, you will learn to weave the banana small length. To work, you need to prepare a hook, slingshot so that the excavations look into your direction, two colors of rubber bands. Phased instructions:

  • We cling to the right column black, twisting four times.
  • For both branches we cling two yellow. We throw off through the top of black inside.
22.
  • We wear four yellow. Transfer to the right and left the previous layer to the center.
  • We put on four more, we transfer the previous series inward. We repeat so again.
23.
  • We put one black, throw off the previous yellow layer. We add two more blacks, throw off the past. Finish weaving, forming a loop.

TitleFigurine Bannacker Rainbow Loom on the slingshot! Lesson 22.

Video lessons for beginners on weaving animal figures from rubber

Weaving with silicone small rubberry fascinated by many children, adolescents and even adults. This is a great way to pass time, relax, calm down and get as a result interesting, original product. Weaving is especially useful for children, as it helps to develop the skills of working with color, combinations of different shades, preferabity, attentiveness, fine motor skills. The resulting figures from the rubberry are not afraid of moisture effects, they remain as bright under the influence of the rays of the Sun.

According to the above video for beginners from YouTube from Sergey and other Masters, you will learn how to spit according to the schemes, way of amigurumi rubberry such funny animal figures, like duckling, lizard, chicken, fish, bee, flat and surround. Such crafts can serve you with a suspension, a key chain for a backpack, handbags, bundles of keys, toy for a child, decorating your room. For work, prepare in advance all the necessary materials and tools: the machine, hook, multicolored iris with a margin, so that during the weaving you did not distract you.

Weaving lesson "Bee"

TitleFigures made of rubber. Bee from rubber without machine

Ringing figures in the form of "fish"

TitleGoldfish from Rainbow Loom Bands Rubber. Lesson 319 | Goldfish Rainbow Loom.

Easy weaving "Chicken"

Title3d chicken, lesson 36

How to make a bulk "duck"

How to learn to weave the "Lizard"

TitleGecko (lizard) from Rainbow Loom Bands gum. Lesson 211 | Geko Rainbow Loom.

Found in the text error? Highlight it, press Ctrl + Enter and we will fix everything!

After seeing the wonderful figures from the rubber, it is impossible to stay indifferent. A collection of charming bells, bracelets, toys and keychains can be easily viewed and very nice to hold in your hands. It is amazing that these wonderful crafts are subject to children's fingers. We appeal to all readers: Be sure to try to weave yourself!

How to weave from multicolored gum figures

Almost any crawl is possible to rush on a special machine or plastic slingshot. Machines are distinguished by sizes, there are collapsible and solid. The slingshot has two or four columns, and the machine is at least eight. At the same time, the columns or protrusions are made in the form of trays, which allows you to catch the rubber band without problems. At the edges of the columns, restrictive segments are provided that do not allow rubber bands during weaving. The usual hook is made of plastic, but many use more reliable and comfortable metallic, designed to work with yarn.

Someone does not stop on standard devices and knits from a rubber without a machine on pencils or steps, only with the use of a hook, on the table forks and just on the fingers of one hand. Of course, the most complex products can be performed only on the machine. If you remember about the fingers, then many it turns out to work faster in this way. Thus, the choice of the tool is determined by which figures are planned to be placed and personal experience.

Repeat the figure is possible on a master class with a comment and photo or find and watch video weaving lessons. Each option has its advantages and disadvantages, so it is better to use both.

What is still recommended to purchase for weaving

Mastering the weaving is convenient with a special set in which there is a machine, a slingshot, a selection of rubber bands and clips for their connection. Then you can purchase rubber rings, and unfolded in packages in colors. Unfortunately, inexpensive rubberbies are fragile and can break at the time of weaving. If they can be used so that you will have to redo a significant part of the work.

Rubber rods are transparent, with glitter and even two-color. In other words, you can immediately repeat the color solution in accordance with the master class or solve it in its own way.

Beginners easier to learn to weave on the slingshot

The slingshot is a very convenient universal tool. It is customary to keep in one hand, and the other is to wear elastic and refueling them with crochet. There are slingshots very small, and figures with a large number of gum do not constantly do on them. With this tool, we will learn to determine a few simple interesting and popular figures. Rooms of pictures and description items coincide, so it will work conveniently.

Strawberry do the easiest

Strawberry will require quite a bit of time and a small amount of rubber. At the same time, it has a bulk form and is very similar to the present. Strawberry can be attached to the keys or put on a fountain pen as a decoration. We temporarily commissioned our little figurine charming squirrel.

Red rubber bands will be required for the base, green - for strawberry tail, ordinary slingshot and any hook:

  1. The ring of red twice is twice and placed on the right half of the slingshot. It is posted alternately alternately alternately, and after and another rubber band is red.
  2. Remove the twisted ring on the weaving center, then add two next rubberbers.
  3. Transfer to the central part two placed rings with the right half of the slingshot.
  4. Move two placed above elastic bands from the left speaker on the right.
  5. The stretch from above is one first, and then the second rubber band of red and shyani lower red rubber bands from the left column.
  6. Add the next pair of rubber bands and to sleep the lowest gums from the left half.
  7. After that, moving from above the gum, which we have two pieces, from the right column to the left.
  8. Stretch one more, and then the second rubber band and reset the four central rubberry of the right column to the center.
  9. Again picked up a couple, located at the top of the right protrusion, and move to the left.
  10. Put the pair of last red rubber bands on top of the available, reset the two, which are below the right side.
  11. Now you need to throw one first, and then another green gum and move two red couples on them with the right side and the two most upper pairs - from the left half.
  12. Move the green rings from left to right, we throw two green rings.
  13. Drop the crochet all red rubber bands from the left column on the central part.
  14. Sketch one green ring and take off all the remaining gums on the center, leaving only the ring that we were put on the last time. Reset all the remaining gums on the hook, there will be two green elastic covers on it.
  15. Stretch one through the other and tighten to secure. With this tail, our strawberry turned out! Master class We always complement the video. With it, it is possible to understand incomprehensible.

Banana can be weave in 5 minutes

Banana is an easy figure and really tie it in 5 minutes. It can be used in the same way as the strawberry. We have tied the whole bunch of bananas, and the caterpillar could not stay indifferent ...

For weaving, elaborates yellow and black (or brown) flowers, slingshot, hook of any type:

  1. Stretch on the right ringshot column twisted in three turns of the gum.
  2. Around the two yellow rings, not twisting, on both protracting slingshots.
  3. Drop black gum in the middle between pins.
  4. In such a state, the weaving looks now.
  5. Take another four yellow rings, without twisting.
  6. Remove the two lower yellow gums on both halves to the center.
  7. Now weaving looks like this.
  8. Purpose four yellow rubberry, without twisting.
  9. Take the bottom four rings from each speaker in the middle.
  10. In this state, weaving now.
  11. Add three yellow rubber rings in a standard way.
  12. Throw four lower yellow rings in the middle.
  13. Place two yellow gum, as usual, reset the three lower yellow rings from each protrusion to the central part.
  14. Add two black gum in the usual way.
  15. Remove the two lower yellow rings with each half, as was done earlier. Put black gum as usual.
  16. Throw two lower black rings into the gap between the columns.
  17. Remove the banana from the machine, but leave two black gum on the hook. Cooking with a crochet one of them and swallow through the second to get a node.
  18. This looks like a loop.
  19. Our banana is ready! The video complements the master class. You can consider the moments that are unclear.

Ice cream from rubberry is even more beautiful than the present

Seeing such ice cream, it is impossible to resist: I want to immediately run to the store or to weave him. The loop at the top allows you to fix the craft on the pencil, a fountain pen or bundle of keys. Give a dad toy, and the decoration will be all day to swing on the car keys. As you can see, the bunny also loves ice cream and does not want to give it to anyone.

We will need rubberons of orange, pink, green and yellow flowers, slings and hook:

  1. Out on your fingers one orange gum in four turns and reach on the right column.
  2. Take two orange rings over the placed.
  3. Piccling crocheted twisted rubber and peroxide on already suitable.
  4. In this state, weaving now.
  5. On top put on another pair of orange rubber bands.
  6. With the help of the root hook and throw off the two the lowest rings from each stroke column.
  7. In this state, weaving now.
  8. Stretch two more orange rubberbers and, using a hook, try on them located below elastic bands from columns.
  9. In such a state, our ice cream at this stage.
  10. Now we start using pink rings. It is very alternate first one, and then the second pink gum.
  11. Cooking orange rings with columns and throw them into the central part.
  12. In this state, weaving now.
  13. Purpose two green rings and take the pink rubber bands from the columns.
  14. Now weaving resembles a pigtail.
  15. We use the new color - yellow, wear two gums on the sling and with the help of the hook we throw green on them.
  16. So we do it.
  17. We put on another yellow couple and throw a lower yellow pair on it.
  18. So we do it.
  19. Remove the yellow rings from the left column on the hook and carry them on the right.
  20. Next, you need to start a hook in pink gum and put on it two more pink.
  21. Spend them through the pink rings and return all the loops on the hook.
  22. Purpose of the loops on the left column.
  23. Top we throw two green rubberbers.
  24. We throw off on them recently a couple of pink swips.
  25. We follow our yellow gums, we put them on sling.
  26. Pick up the crochet green rings and persuade them to just a couple.
  27. Further, we have a yellow color again, we put on the corresponding rings.
  28. Remove the lower yellow gum from columns.
  29. Alternately all rings of blanks on the left column.
  30. Back to the pretty hook in pink gum at the very beginning of weaving.
  31. Put on him two pink rings.
  32. Spend two risks through the rubber bands of weaving and put them on the right side of the sling.
  33. Prost a couple of green rubberbers.
  34. Throw off on the newly risks already placed pink rubber bands. On top Non-on two yellow rings.
  35. Throw off the lower yellow gum, then add two more tops.
  36. Repeat item 35.
  37. Last time, throw off the lower yellow rings in the center.
  38. Additional yellow rubber band and move on it all rings with slings.
  39. Remove the remaining loops on the hook, spend one through another gum and tightening. You will get a loop that does not allow weaving. Our ice cream is ready! Master class We always complement the video. With it, it is easy to understand incomprehensible.

Little Christmas tree can also be tied

The miniature Christmas tree is also easy to tie out of colored rings. A wonderful gift for the new year is easy to make with your own hands for a friend or relative. Playful mice have already squeezed the Christmas tree made by us and want to carry it.

For weaving the Christmas tree, take rubberons of brown, red and green colors, as well as a slingshot and hook:

  1. First we connect the trunk of our tree. Cerencing on the right half of the slingshot twisted four-solid brown gum. There are two more brown rings on both passing a slingshot.
  2. Crochet drags twisted four rubber in the gap between the columns.
  3. Posted by two more brown rhocks on the slingshot.
  4. Reset two lower gum from stroke columns in the middle.
  5. Next, add two green rings on both speakers.
  6. Sewing in the center of two lower brown rings from the columns.
  7. Through the hook transfer green rubber bands from the left protrusion on the right. The trunk is ready. Leave it in this position, it will be necessary for us later.
  8. Place a green ring on the left column, twisting it into four turns.
  9. Take two green gums on slingshots.
  10. Steps twisted ring into the center.
  11. Add two more green gum.
  12. Remove the two lower green rings from the columns. Do not touch the rings related to the first billet.
  13. Place two green gums on slingshot.
  14. Fresh two lower gums with both columns as we did before. The first twig of our Christmas tree is ready.
  15. Move the rings made of the made twig with the right column on the left. Then move the upper gum of the first billet from the right protrusion on the left.
  16. Reset all rubber branches in the center.
  17. Move all rings from the right column to the left. Next, you need to make a second twig identical to the first. To do this, repeat steps from the 8th to the 14th.
  18. Now you need to move all the rings of the finished part on the right side of the sling, and not on the left, as we did it before.
  19. Then move the upper rings of the very first billet from the left column to the right, on top of all the second branches. Next, you need to move all rugs on the center, leaving only the elastic part of the first part.
  20. Further put on two green rings on the protrusions.
  21. Reset the lower green rubberbers. Move all rings from the left column to the right and lower them down.
  22. Skink twisted four-solid gum on the left column.
  23. Additional green rings and reset into the center twisted elastic bands.
  24. Add two more green rings and transfer the bottom green gum from two protrusions to the center. The finished twig of the second tier to move to the left column, and then there are two upper elastic bands in our main billet.
  25. Throw off all the rings of the twig of the second tier and move all the gum from the right side of the slings to the left. Now you need to make another twig of the second tier, for this you need to repeat steps from the 22nd to the 24th, but in the latest step should move the part to the right protrusion, and not on the left, as in step 24. On the same postage post The tops of the main billet from the left column and throw off all the rings of the second twig at the center. Then put on two green gums on the slingshot, reset both lower from each protrusion and move all the rings from the right column on the left.
  26. It is time to produce the twigs of the last, third tier. Stretch twisted elastic band on the right column slingshot.
  27. We throw two green rings on the sling and sleep the bottom twisted gum on the center. The twig is ready! Transfer it to the right column of slingshot, there the top rings of the workpiece and move all gum sprigs to the center. Transfer all rings of blanks to the right ledge.
  28. Make the second twig of the last row, twisted the four-solid gum, throw it on the left column, put on two green rings and throw off the center of the twisted rubber band with a crochet. The finished twig is placed on the left ledge.
  29. Packing the upper gum of the main billet from the right column on the left, throw off the sprigs.
  30. In this state the Christmas tree now.
  31. Adjust a couple of green rings.
  32. Sleep bottom green gum from protrusions to the center.
  33. Transfer all rubber billets on the right column, twisted four-solid red ring and stretch to the right ledge. On top of the others, we throw a red rubber band without twisting.
  34. Moving into the center all the lower rods on the slingshot, leaving only put in the last step red.
  35. Remove the Christmas tree from the machine on the hook. It currently remains two loops of one red rubber. Sleep one through the other to form a nodule, then the sticking loop will turn out.
  36. Tutting the loops and wrap around the resulting Christmas tip to disguise the loop. Our Christmas tree is ready! The video complements the master class. It will help to consider the moments remaining unclear.

How to make volumetric figures 3d on the machine

Figures made of rubber on the machine to weave, of course, more convenient. With it, complex and beautiful figures are becoming affordable, including volume or 3d. Of course, the colored rings, and the time will also have to spend more. We offer several relatively simple master classes of cool features for beginners.

Weave aluu rose with your own hands

Rosette from the rubber, probably does not smell, although the gnome liked. In any case, it does not start, and the flower can be safely given. Nothing prevents from making a whole bouquet of flowers from rings of different colors.

When weaving, we need rings of green for stalk, yellow or any others - for the core, and for the creation of bud we took pink. The Monster Tale Machine is also needed and any type hook:

  1. There are four protrusions "Monster Tayila", that is, two front row columns and two rear. Put on the perimeter four pink roses, twisting them with eights. There should be a square from rubber.
  2. The second step is cast on the same protrusions on one pink ring, but no longer twist them.
  3. Remove into the center of weaving for two gums located at the very beginning from all columns, in this case these rings we put on in the first step.
  4. Innight another square of pink rings.
  5. Throw off two lower gums from each column to the center.
  6. Make another row of pink swips in the usual scheme.
  7. Just as before, reset the two bottom pink rubber bands from each part of the machine.
  8. The next layer is already made of yellow rings.
  9. Reset from the machine located at the bottom of the rings.
  10. Move two yellow rubber bands from the right back of the rear row to the rightmost neighbor.
  11. Remove a couple of lower rings from the pin, to which we just moved elastic bands.
  12. Transfer the ring from the left back of the rear row to the left side of the machine.
  13. Remove a couple of lower rings from the left column in the middle.
  14. The bud of our rose we already spllage, stayed by a stalk. Next, weaving will occur on two columns of the nearest part of the machine. Addition a couple of green rings into two protractions "Monster Tayila".
  15. Throw two lower yellow gum from each speaker to the center.
  16. Skink a couple of green rings.
  17. The usual way to take up two lower green rubber bands with both columns.
  18. Repeat the 16th and 17th steps, gaining a sufficient length of the stalk that you like. When the required size is achieved, put on one green elastic band on the machine.
  19. Throw off two rings below the rest, from all parts of the machine.
  20. Move the rings made of flower on the hook. It remains two hinges of one green gum.
  21. To determine one loop through the other, to get a knot, tighten it and take off the hook.
  22. Give the shape of our rose, slightly lowering her bud so that the yellow core was a little higher. Our rose is ready! Master class We always complement the video. With it, it is not difficult to understand incomprehensible.

Easter egg on Monster Tale Machine

The egg that keeps the stork will definitely not break: it is from rubber rings. Such a figure of 3D can be done for a friend for Easter. Easter eggs paint in very different colors, so you can make several different colors.

All that will be needed: yellow, green, red rings, Montster Tail machine, hook:

  1. To start weaving, pairs of yellow rubber bands will be used. We take the first, twisting the eight and stretch on the central pins of the near and distant row of the machine.
  2. We throw yellow rings on extreme columns, making crosshair.
  3. The following rubberbers wear a long-range left pin from the left pin to the right side of the near row, as well as on the right side of the far row and on the left protrusion of the near.
  4. Next, we will use one yellow elastic band. Create a circle from rings, throwing them one after another, starting from any column.
  5. We pick up the two lower gum from all the machine columns and throw them into the central part of the weaving.
  6. Begins to pour out the basis of our egg.
  7. We attach another circular layer of rubber, take one thing.
  8. We throw off two lower rings from each column again.
  9. Next row make a green rubber band. We put them in the same way using one.
  10. Throw off two lower yellow rings from all columns, applying a hook.
  11. The next row performs from red rubberry on the already known rule.
  12. Throw off lower green rings from all columns.
  13. Make green row again. We throw in a circle on one green rubber.
  14. We reset the lower red rings from each column.
  15. We return to the yellow color, we put in the circle of the rubber.
  16. We throw off the lower green rings around the perimeter.
  17. Next, make another row of yellow rubberry and throw off the bottom from all columns.
  18. Take a little wool and shove inside the eggs. She must shape shape, but at the same time not to stick out of weaving.
  19. Collect all the rings from the columns on the hook, take one yellow elastic band and stretch it through all the rings on the hook. After that, the two obtained loops on the hook and extend one through the other, good tightening.
  20. You can evaluate which egg we got! The video complements the master class. It allows you to consider the moments remaining unclear.

How to make a cool snake

I really want to hold the snake in my hands. 3D Snake from rubber slats is definitely not biting and easy to crush around a pencil or fountain pen. We made two at once, so that they were more fun.

To create a snake, there will be rings of three colors, in this case white yellow and black, one red-colored rubber band, a full-size machine with three rows, any hook. In the role of the main color will be used yellow, but it can be replaced by another:

  1. Cook the machine. Middle and distant rows should stand equally towards each other, and the average row must be moved forward to one column in relation to two others. First we melt the tail of a fun snake. First of all, throw a black elastic over the first and second column, then white - on the second and third, then again black on the third and fourth, yellow - on the fourth and fifth, yellow again - on the fifth and sixth, yellow - on the sixth and seventh . Further, the Scheme is the same: stretch the black ring on the seventh and eighth, white - on the eighth and ninth, black - to the ninth and tenth and three yellow - on the tenth and eleventh, eleventh and twelfth, twelfth and thirteenth columns. All gums are placed, as usual, and do not twist.
  2. We throw the second layer of rubberry in the same order as in the first step.
  3. Logging on all middle row bars along the same system as in step 1.
  4. Then repeate step 2 on the middle row of the machine. If you want your snake to be a very long tail, placing the rubber bands in the same way as it was done earlier, in the middle of the machine. We choose the tail of medium length, so we will not repeat the scheme in the near row.
  5. The tension of the rings on the thirteenth column of the far row, twisting them four times.
  6. Prevent a hook in the open part of the thirteenth protrusion, tightening just a rumber and capture from there two lower yellow.
  7. Remove the captured rings upstairs, without removing the twisted gum, and put on them on ahead of the next column, which is listed here at the number of twelve.
  8. On the twelfth, the protrusion needs to be done all the same, only the twisted gum here is not, and the upper rings are already drawn. It is necessary to start the hook again into the inner part of the column and pick up from there the two lower yellow rings, pull them out and put on ahead of the arrow.
  9. This is the tail of our snake at this stage.
  10. Elastic bands on all columns of a distant row as we did in step 8. On the very first ledge, you don't need to do anything when you put on him rings from the second column, go to the next step.
  11. Prevent a hook in the inside of the first protrusion and take off the four black gums on the hook. Then reset the rings from all other protrusions, holding the four rings on the hook.
  12. Purpose four gums from the hook on the last, thirteenth middle row column.
  13. We do the same as in step 6, only tighten the yellow ring, but four black. For the convenience of thawing a little finished part of the tail, so that it is easier to capture the lower yellow rubberbers on the thirteenth column.
  14. In the same way as in the 7th step, extend yellow rings and put on them on ahead of the running protrusion.
  15. Swells all gums on all columns, except the first, as we did in step 10.
  16. Repeat step 11 and put the finished tail on the slingshot or a free hook. You can place it on the latest machine columns, as this item will need a little later.
  17. Let's make the eyes of our snake. To do this, take a black gum and put on her hook, twisting four times.
  18. Then take two yellow rings, put on the hook and roll over the black gum on these two yellow rings. Simply put, grind yellow rings through black gum. We repeat the steps, we need two eyes.
  19. Take a couple of yellow rings and put them on the first pin of the neighbor and on the first protrusion of the middle row. The next pair of yellow rings is cast on the first protrusion of the middle row and the first far.
  20. Putting out our elastic bands with eyes on the first and second long-range columns and on the first and second protrusion of the neighbor.
  21. Next, we throw in turn after another pair of yellow rings, starting with the second and ending with the fifth long-range column. Now in the same way to put the pair of yellow gum on the protrusions of the middle row, starting from the first and ending the seventh. Then put on the rings on the near-row pins as it was done on the far row.
  22. We throw one pair of rings on the sixth column of the near row and on the seventh - medium row. Then another couple of rubber bands are put on the sixth protrusion of the far row and on the seventh - middle row.
  23. We throw one yellow ring on the sixth columns of all three rows. The placed gum will be similar to the triangle.
  24. Similarly, put on one ring on the fifth columns of the ranks, fourth and third.
  25. Take a pending tail and put on its four gums on the seventh protest of the middle row.
  26. Prevent a hook in the open part of the seventh column, slying the black ring and pick up the most upper two yellow rings.
  27. Captured gums from us from a distant row, so we move them to the sixth column of a far-row.
  28. We again start the hook in the seventh protest and pick up two more upper yellow rubberry. These rings from the near row and we put them on the sixth protrusion of the near row.
  29. Again we bring the hook in the seventh column and pick up the last pair of yellow rubber bands. We throw them on the forward going on the sixth protrusion of the middle row.
  30. We start the hook into the open part of the sixth column of the near row, pull out all the upper rings and pick up the two lower gums.
  31. We transfer the captured pair on ahead of the running protrusion.
  32. On this column, he has the fifth on the bill, we pull out all the upper rings, including the triangle of the ring, and carry them on the backward protrusion.
  33. Thus we ride the whole neighbor as we did it in step 32. We transferring rubbers from the first pin to the first protrusion of the middle row.
  34. Perform the steps again from the 30th to the 32nd on the far row of the machine.
  35. Now we are wearing the middle row, we bring the hook in the sixth column of the middle row, pick up the bottom pair of the ringlets and put it on ahead of the running protrusion.
  36. So you have to get.
  37. In the same way, all the elastic bands of the middle row are weed, here we do not interfere with the ring, the triangle is suitable.
  38. We start the hook to the first protrusion of the middle row, we take a red rubberbar and do it through all the rings on this column.
  39. Return the red ring on the hook, now there are two red peels on it.
  40. We carry out one loop through the other, forming the nodules that we tighten. Then remove all rubber bands from the machine, give the form of the resulting snake and cut the scissors the protruding rounded part of the red rings to form a tongue.
  41. Such here we got a snake! Master class We always complement the video. With it, you can understand the incomprehensible.

We look at the video lessons of weaving from rubber

Little minion can be weave on slingshot. Duration video 17 min, but really will have to work more. The ring on his head allows you to fix the craft for decoration, for example, a New Year tree. Blue, black and yellow gum will be required.

The duration of the video tutorial of the cover for the phone is 18 min, however, difficult work will require much more time. The case of rubber slats will not only make your gadget unusual and cheerful, but also protect him from shocks. The exercise knits only on the hook as a sweater. The color of the rubberry is selected to taste.

Bright fish seems alive as if from the Red Sea. Work is carried out on the machine as much as 37 min. From the inside of the exercise is filled with cotton. Such fish can be made a few different colors and hang on thin imperceptible strings in an improvised aquarium.

The charming kitten is made on the slingshot, the roller lasts 35 minutes. Making a second cat in you will succeed much faster than the first one. It will be very fun if several multicolored kittens will play on your desk.

Unicorn is done on the machine. Sergey tells about his weaving 20 minutes. If you gain patience and do two, then the second uniform can be given to a friend.

After bracelets and harnesses, weaving from the rubber figurines for beginners will become the next stage in the development of the equipment of the rubber weaving. To weave the figurines is much more interesting, albeit somewhat more complicated than bracelets. You can make figures in different ways using various equipment. Special technique with the help of a hook can create 3d souvenirs or toys. Crafts from rubber bands can be used as key rings - trailer them on a bag or keys. Indeed, unlike fabric, silicone is not wiping and easily clean.

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

We start with simple

Figures of animals and dolls can be plane on any convenient equipment - machine, slingshot, fork, hook.

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

The easiest way to perform weaving on the machine, especially beginners, as weaving is well visible and you can easily fix errors. For machine weaving, you need to purchase a special machine (professional or children), hook and elastic bands of different colors.

You can weigh simple figures on Monster Tayle, that is, on the machine from the same name. For more complex and volumetric figures, it is better to purchase a professional machine with nominating rows for a comfortable weaving.

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

As an example, we give the machining of pumpkins. To do this, prepare:

  • machine;
  • Approximately 88 orange rubber and 6 green rubber bands;
  • hook;
  • Filler (syntheps).

How to weave:

  1. Remove the central row of the machine and install it so that the notches look right;
  1. To put on the "eight" throughout the perimeter of the machine from one to another peg;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. To wear a second row of rubber bands as in paragraph 2, but not twisting;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Adjusting the crochet, transfer to the center 2 the lowest loops on each column;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Repeating 3 and 4 points, weave 7 rows;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Gently remove all weaving on the hook;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Stretch one gum through all loops, pull it out;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Capture the extreme loop and hide the tip between the loops;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. From the reverse side, throw the double hinges for 2 hooks and fill the workpiece with syntheps;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Stretch the gum as in paragraph 7 and stroll;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Wrap a gum received pumpkin;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Make a green tail, relying on the photos below:

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Ready!

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Little souvenir

Simple crafts, key rings, figures can be plane without a machine using a special slingshot or hook. Cute souvenirs are obtained.

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

On the slingshot you can make many items and characters. Newbies are better to start with simple schemes. For example, you can weigh a key chain-lollipop.

To do this, prepare a slingshot, hook, rainbow gum (16 pcs.) And white rubber bands (18-20 pcs.).

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

How to weave:

  1. Throw the "eight" on the slingshot of a white gum;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Wear a color and white gum from above, and then throw a loop with two horns on them;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. To wear 1 gum, for example, yellow and throw down the lower loops with horns on it (in the photo it is a loop of pink gum);

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Repeat 3 item, alternating colored and white gum, and weave the harness of the desired length;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Throw down the lower loops in the center, without throwing a new gum from above (end of weaving);

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Move the loop from the left horn to the right;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Lower loop to transfer through the horn to the center;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Remove the harness from the slingshot, tighten the loop and lengthen it: skip the end of the gum through the loop, and then through the gum itself, tighten (it should turn out both in the photo);

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Start wearing the second part of the lollipop with white: to wind the eight of the eight of two turns;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Not twisting, throw a gum from above in two turns;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Pick down the lower loops and transfer to the center;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Repeating 10-11 points to the desired length (use of about 10 rubber);

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. At the end to move the loops from the left horn to the right;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Connect two details: Skip through the loop on the horn loop of the first part and remove from the slingshot;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Twist on the table Color part in Karamel;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Skip the hook through the center of the spiral to the base of the stick, capture the loop and bring it to the center;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Enter the hook from the opposite side from the sticks through the colored rows and catch the loop, pull out and tighten.

Ready!

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Third option

If there is no slingshot, then we can weave on forks. To do this, you need to build a "machine" of two table forks, wrapped with scotch. Teeth should look at different directions. Weaving is obtained dense and neat.

For example, it is proposed to watch video weaving simple fish:

To create funny-toy animals, you can use the technique of Lumigurumi. It is very similar to Amigurumi - the technique of knitting toys from the threads with the help of a hook, but there are elastic bands in it, and not yarn. Elastic toys can also be filled with filler, such as syntheps and use for a game or as a keychain.

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

The schemes of weaving resemble the usual knitting amigurums. It is necessary to separately make all parts of the body and connect them between themselves.

Toys are rushing in a circle so that the balls or cylinders come. All loops are pronounced, as a rule, without Nakid, if this is not specified in advance. Each large detail before closing knitting is styled with a synthetic tubeboard or other filler. So get light and soft toys.

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

To understand how to weave the figures in such a technique, we give a teddy bear as an example.

For work you will need:

  • hook;
  • Small gum;
  • Beads.

How to weave:

  1. Dial 6 air loops and connect them into the ring;
  1. Knit the second row with add-ons in each loop, the third - in each second;
  1. Knit 5 rows without additives;
  1. Fill with syntheps and start to subscribe;
  1. Rebuilt through one loop, in the last row to make a row in each loop;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. By the same principle, make a torso, but instead of adding to each second loop, add another row and make an increase in each third loop, and then knit another 5 rows unchanged;
  1. Follow each third loop first, then - every second, in the last row to make the accumulation in each loop;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Make ears from two rows with add-ons to each loop;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Make out 5 loops muzzle;
  1. On the hook to wind a black gum, pick up white and skip through the cross, the ends of a white gum skipped through the fruit center;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. From 2-3 rows to make rear legs;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Join your head and torso, make the front legs, skipping a hook through the loop and sticking the air loops of double rubber bands;

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

  1. Attach the ears, the rear paws, a muzzle, bead eyes.

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

The resulting bulk toys can be given or use as an interior decor. If you make a loop from gum, then you can wear such a little animal on the bag.

Weaving from rubber: figurines for beginners on slingshot and on the machine with photos

Video on the topic

For a better understanding of the nuances and the principles of weaving, it is recommended to watch video lessons.

How to weave figures and toys from rubber band - Photo, video, schemes

Rainbow figures and toys from Rainbow Loom rubber. Are you collecting colorful crafts from rubberry? Today you will learn how to weave the figures from the gum, which is not yet in your collection.

We present to your attention the newest, the most recent schemes and video weaving toys from the rubber. In the journal Javmoda.ru you will find new interesting weavings from the rubber.

And so, let's go ...

How to weave the figurines from the rubber?

If you are interested in placing figurines from the rubber, it means that you are no longer a newcomer in needlework with Lumigurumi. And if still newcomer, and decided to start their way with Amigurumi Lumigarmi from the figures, then it will be useful for you to read our article - weaving from gum for beginners. From there you will learn how to quickly learn to weave big toys and figures from the rubber, where to start, and how to move along the way of studying weaving.

We will tell briefly the basics of weaving. You can weave the figures and toys from the rubber band using the Rainbow Loom machine, on forks or crochet. Weaving technique depends on what kind of toys or figure are you going to do. On the machine can be weave, as correct, only small toys. If this is a big toy - it is to weave it with a crochet in amigurum techniques, or make individual parts on the machine, and then collect in parts.

The same figures can be made by various technicians. For example, the heart of the rubber band can be splashing both on the machine, crochet and forks. To choose the technique of weaving only to you, it all depends on personal preferences. You can get acquainted in our article on weaving techniques in detail in our article - appliances and types of weaving from rubberry.

The author of the toy from the rubber band - Yana Potapova
The author of the toy from the rubber band - Yana Potapova
The author of the toy from the rubber band - Yana Potapova
The author of the toy from the rubber band - Yana Potapova

What is needed for weaving figures from the rubber?

For weaving from the rubber, you need a lot of different rubber bands. As a rule, large toys are driving a larger number of gum. Decide with the colors of toys and assemble / buy the necessary gum. It is better to buy good durable gum. It will be very offended if at the end of the weaving toys some kind of rubber burst and the whole toy will fall apart. And by the way, durable gum is not always the most expensive. Sometimes inexpensive kits consist of very durable and well-drawn rubber. It all depends on the manufacturer's firm for weaving.

What else is needed for weaving figures from the rubber band. Machine and hook for weaving. If you decide to weave the figurines and toys from the rubber crochet, then you need to buy a special hook for rubber bands. Of course, you can do it and the usual crochet, which knit from the threads. You can adapt to any tools for weaving.

Machine. It also happens different - the original Rainbow Loom and the Chinese machine. What is the difference between the machines for weaving from the gum of toys, and how to choose a good machine, we already told in detail in our article - how to weave from rubber, and what is needed for this.

Now, when you know what you need to start weave from elastic figurines and toys, it's time to start. We present to your attention the newest and interesting schemes and video of weaving from the rubber figurines.

Author - Yana Potapova
Author - Yana Potapova
Toy bull from rubber band. Author - Zhenya Dubchak
Toy bull from rubber band. Author - Zhenya Dubchak

Owl - weaving figurines made of rubber

The most popular toy from the rubber band is Owl. This can be explained by the fact that the owl is considered a symbol of wisdom. Probably, therefore, such a talisman seeks to gain many.

Have you already managed to do it? If not, then the time to weave the figurine owl from rubberry. There are several techniques of weaving owls from rubber. Like other figures, owls from the rubber bands are different - large and small, flat and volumetric, there are still frescoes from the gum with the image of the owl. The owl of the rubber band can be placed on a machine or crochet.

How to weave the complex Figurine owl from the rubber, you will learn in a special article on our website - Owl from rubber bands - photos, schemes. And here we will show how to rinse the flat figure of the owl of the rubber band.

Toys from rubber bands - owls
Toys from rubber bands - owls

A rubber doll - weaving toys from rubber bands according to schemes

Another popular type of toy from rubberry is dolls. Like any other figures from rubber, dolls are different - large and small, flat and volumetric. You can create a whole wardrobe made of rubber for your dolls. From rubber bands can make dolls for dolls, caps, handbags, belts, shoes, swimsuit and other clothes.

Clothes for dolls from rubber. Weaving author - Yana Potapova
Clothes for dolls from rubber. Weaving author - Yana Potapova
Dolls in bright clothes from rubber. Author - Elena Zaslavskaya
Dolls in bright clothes from rubber. Author - Elena Zaslavskaya
Collection of dolls from rubber. The author is Valery Nenzhurg
Collection of dolls from rubber. The author is Valery Nenzhurg

How to weave toys from rubber bands - Minions

Have you already learned to weave the figure of owls and dolls from the rubber? We offer another interesting version of mignon toys. How to weave figures from rubber bands - according to diagrams or video? From Rainbow Loom gum you can make a charming fresco with an image of a minion with hair. Or make a key chain with minion. Also there are weaving schemes of minion figurines - flat and bulk, small and large.

We collected all the schemes and video of weaving minions in one of our article - minions of rubber bands - photos, schemes.

Figures and toys made of rubber bands - how to weave minion
Figures and toys made of rubber bands - how to weave minion

Figurines made of rubber - how to weave the flower

The wonderful accessory is a cute flower of rubber. How to weave from a rubber figure Flower? There are several options for weaving the flower - on a machine or crochet. You can make a bracelet with a flower, a key chain with a flower or "plant" flowers in a vase. Decorate your home with a wonderful figurine made of a flower in the form of a flower, or give a close colorful flower.

The author is Jan Kushnir. Flower made of rubber.
The author is Jan Kushnir. Flower made of rubber.

Toys and figurines made of rubber bands - heart

What could be better than expressing your sympathy and love with your own hands? A solid version of recognition is a cute bracelet weave hearts. More simple confession is to absorb the figure heart from the rubber band. How to weave such a figure? There are various weaving techniques Heart from rubber band - this is weaving the figurines on the machine, for forks or crochet.

Photo: Heart of rubber band - how to weave the figure?
Photo: Heart of rubber band - how to weave the figure?

Fruits made of rubber bands - how to weave figures and toys?

What figures of fruits can we rush out of the rubber? Bananas, pears, strawberries and even grapes. We glue a basket from rubber, and then fruits - it will get a wonderful still life.

The author of the figurine from the rubber band - Polina Kulikovskaya
The author of the figurine from the rubber band - Polina Kulikovskaya

Elastic figurine - how to weave hamster

Get the charming hamster house from the rubber. How to weave a hamster toy from rubber? Cute bulk hamster can be made from elastic bands on the machine, as well as weaving technique from rubber on the fork. These little wonderful hamsters will become an excellent gift for children, as well as an excellent souvenir keychain for those who are not indifferent to these animals.

Photo: 2 friend hamster - how to weave toys from rubber bands.
Photo: 2 friend hamster - how to weave toys from rubber bands.

Keychains and toys from rubber bands - how to weave ice cream

A reminder of the sweet moments will be heated by ice cream figures from rubberry. How to weave them? This simple key chain will bring a lot of pleasant impressions and emotions. And the ice cream figure is very simple - you can do on a classic machine or a small Monster Tale Machine.

Figures ice cream from rubber
Figures ice cream from rubber

Toy from rubber band - Panda, how to weave?

The figurine from the rubber panda is the same as hamster can be made on a small machine Monster Tale and on a classic machine. There are charming panda caps on the handles. Welcome a panda from the gum you can on video master classes. I must say that the weaving of toys is greatly simplified using video lessons and master classes.

Photo Panda
Photo Panda

Toys from Hello Kitty rubber - how to weave?

Popular toy Hello Kitty is now from rubber. How to make Hello Kitty? Learn to weave the figurine from the rubber band, you can use video master classes. The famous Hello Kitty toy can be made on a machine or crochet. It all depends on what size toy you want to do. If this is a big toy Hello Kitty, then weave or kicked with the amigurum-lamigurum technology. And if a small figure made of Hello Kitty rubber, then it can be done on the machine.

Look, what are the figures of Hello Kitty you can make a rubber in our detailed article - Hello Kitty of rubber bands - photos, schemes. In the same place you will learn how to make figures from an elastic band on video and schemes.

In the form of a favorite toy Hello Kitty there are beautiful caps on the handles, key chains, toys and even frescoes.

Toy Hello Kitty of rubber bands. Author - Ekaterina Latypova
Toy Hello Kitty of rubber bands. Author - Ekaterina Latypova

Toys from the rubber band - how to weave the horse

You have already learned what wonderful toys and figures can be made from the gum, which there are video lessons and weaving schemes. But that is not all! We present to you another interesting character Lumigurumi - it is horses and ponies from the rubber. How to weave such toys from the rubber band? You can make a toy horse from rubber on a machine or crochet.

From the rubber band you can make a toy horse or pony, pegasus or bison, charming caps on the pens in the form of horses.

What are the schemes and video of weaving toys of horses from the rubber bands you can see in our detailed article - a horse from rubber bands - photos, schemes.

Horse is a toy of rubber. Author - Stas Plutata
Horse is a toy of rubber. Author - Stas Plutata

Rubber Toys - How to Make Mickey Mouse

Another amazing toy made of rubber bands - Mickey Mouse. Yes, the development of the hobby has come to the level of such complex crafts and characters. Video lessons and schemes of weaving will teach you to make original toys Mickey Mausov. But they are obtained as real, there are absolutely incredible bracelets with Mickey Mouse - from such a gift your child will be delighted.

We collected video lessons and schemes for weaving Mickey Mausov in one of our article - Mickey Mausa from rubber bands - photos, schemes.

Rubber Toys - Mickey Mouse
Rubber Toys - Mickey Mouse

Unicorn - Weaving toys from rubber

There is a wonderful toy from the ruin unicorn. This challenging toy is available to those who already know how to make simple things from the rubber. The scheme of the moods of the unicorn is quite difficult, even the video master class on weaving toys is broken into 3 parts. But the unicorn toy turns big and colorful.

How to weave the unicorn you can see our article - the unicorn of rubber bands - photos, schemes.

Unicorn - weaving toys from rubber bands. Author - Anastasia Ustinova
Unicorn - weaving toys from rubber bands. Author - Anastasia Ustinova

Lamb made of rubber bands - weaving toys

The symbol of the outgoing year is a beautiful sheep. If you have not had time to make yourself a talisman, then it's time to do it. You will have a wonderful toy for memory. Just like other toys from rubber, lamb is more convenient to weave with the help of a master class video.

What are the lamb toys from the rubber band, and how to weave them in detail in the article - the lamb from the rubber band - the photo, the schemes.

The author of the toy from the rubber - Irina Skorobogatko
The author of the toy from the rubber - Irina Skorobogatko

Toy from rubber - how to weave a dog

We told how to weave a variety of toys and figures from the rubber, but did not say about the most favorite animal of many families - a dog! How to weave a toy dog ​​from a rubber? You can evan dogs of different breeds, sizes, colors - podsels, shepherds, taxes ... And all this can be learned to weave with the help of video lessons.

We collected schemes, photos and video of weaving dogs of different breeds in one article - dogs made of rubber bands - photos, schemes.

Made from a gum dog. The author of the toy - Anna Musainer
Made from a gum dog. The author of the toy - Anna Musainer

We showed you the newest, most interesting and fresh figures and toys from the gum, told how to weave them. Now your home will be decorated with bright characters. We hope that we lit a desire to create in your eyes.

With love, editorial office Yavmoda.ru

Weaving from rubberry from the moment of his appearance produced Furore and attracted so many people. Despite the fact that the main excitement has passed, still those who want to try such a needlework. In our article we will tell how to weave simple figures in different ways.

Weaving from rubberry is very popular among people of different ages. It is never too difficult to start learning to study him and not particularly difficult. All work does not require a large number of tools. Enough to get tossing rubber. We can weave in different ways even on fork and hands. You can create interesting figures, decorations, products for home.

If you look carefully, you will immediately notice that knitting methods have a huge amount. They all differ in difficulty, but quite performed. The main advantage of the needlework is the rapid immersion in the process, as well as the fact that there is no big experience to create things, because the main thing is to execute instructions.

Let's find out what can weave from the rubberry and what kind of weaving methods are the most popular.

Weaving from rubber band - Technique: types

Weaving from rubberry
Weaving from rubberry

Today, weaving rubber bands are possible with the help of various techniques and they differ from each other used tools. So, weaving on a fork, machine, slingshot and fingers is distinguished.

To weave on the fingers is the easiest way, but only it will not be possible to make different patterns, and you can come up with a lot, especially if you have a very rich fantasy. To begin with, it is better to try simple things, for example, bracelets. If wean a long bracelet and put on the suspension, then the necklace will turn out. And you can even make a whole set.

For more complex products no longer do without a hook. It may be an ordinary, plastic or even the machine. Machines may differ in size and quantity of rods to fix rubberbers. By the way, there are many schemes for creating them on the Internet, but it's easier to buy already ready.

Weaving bracelets and other figures involves the use of various techniques. It can be:

  • Caterpillar
  • Fish tail
  • French braid
  • Sidewalk
  • Scaled dragon

You can create from rubberry and other interesting products. It can be toys, key rings and so on. If children are engaged in such creativity, they develop motility, attention and progress. It is not difficult to learn how to learn him at all. You just need to follow the instructions and step by step to perform the scheme.

Of the rubberry, it turns out very well:

  • Decorations - Bracelets, Rolls, Necklaces and Brooches
  • Figures - it can be a cartoon, cool animals, fruits and so on
  • Clothes for dolls
  • Phone covers
  • Useful things in the house

How to weave with rims on a fork newcomer?

Weaving on a fork
Weaving with rubber bands on a fork

Let's consider a very simple way of weaving for beginners on a fork. This is not at all difficult, and the pattern is obtained more accurate than when it is executed on the machine.

  • Take a rubber and fold in half. Make it out of it eight and place it on medium-sized teeth
  • Still make rubberbies on extreme tooths
  • We place another gum for medium teeth
  • Simple gum, already without eight, put on the center
  • From the middle teeth you need to capture the gum from below and remove it upstairs. The same is done with the second middle kart
  • Further the principle is the same, but only elastic bands are made eight. Continue work until you get the desired length
  • To get a more interesting bracelet, use colored gum
  • To complete the weaving, transfer the gum from the edges to the center, and then take them up from the bottom
  • Do not hurry to shoot a bracelet from the fork. First, in the center of the central part, place the rubber, but for starters fold it twice. It must be discarded everything that is from below.
  • After that, it will remain alone on the plug. One end ripped on the other and attach the fastener

How to Essay Bracelet from Rubber News: Ideas, Basic Schemes, Photos

Despite all the simplicity of creating bracelets, it is interesting to work with them. There are many schemes and they differ in difficulty. In order for your products to be the most interesting, it is better to use different colors.

Scheme "Fish Tail"

Fish tail
Fish tail
  • So, make one eight eight eight and put it on your fingers.
  • Further make a couple of the same
  • Low Rubber Move to the center. To do this, pick her up and stretching up. Transfer over your finger
  • Need to continue to do one more, but without twisting
  • Rubber from below, move back to the center
  • Welcome bracelet to the required length

Scheme "French Spit"

French braid
French braid
  • To work, take the gum of two any colors. In addition, you will also need a hock
  • The first rubber is twisting the figure eight and placing a slingshot on both sides
  • Top to make two more gum, but in the usual way
  • From the bottom of the gum remove from the slingshot so that it wrapped the rest
  • We make a new gum on top and again remove those below
  • Repeat all these actions until the end of work
  • To secure the weaving, transfer the rubber bands on each other and you can make a fastener on both sides of the bracelet

Dragon Scales Scheme

Scaled dragon
Scaled dragon
  • The central row of the machine shifts to one column and all the rubber bands are worn.
  • Start better below the first column and the second in the center
  • Further place the rubber bands as follows: the second number of the first column, the lower row of the third and second column, as well as on the middle row of the third column
  • Fulfay the two row and turn the machine
  • Twist the gum twice on the central column from the edges
  • Remove with an average extreme column a gum that is under the rest
  • Further place a rubber band on the column where it is fixed on the reverse side
  • Now every elastic band can be removed and secured in exactly also
  • It only remains to fasten the weaving and fasten the bracelet clasp

How to weave figurines made of rubber on the machine, stamping newcomer: ideas, schemes, photos

Weaving from rubberry
Weaving from rubberry

The slingshot is a main tool that allows us to weigh the rubber bands. Regardless of the tool, it will work easily and simple. The use of slingshot is always easier than the machine. When you master it, you can move to machines.

First, let's talk about the simple figures from the rubber. It is not necessary to use a slingshot for them. It is quite possible to do without hands or fork. It is important not to be afraid of difficulties, because each product has a standard and divided circuit for several steps.

Poppong

Poppong
Poppong

A simple thrush will like children and animals. Let's figure it out how to create such a beautiful ball yourself. You will need a cotton disk and a lot of rubber.

  • Bend the disk twice. Bring it to the state of the ball
  • Now take a rubber and wrap it to the disk. She must turn around three times. Mode twist in the eight
  • As a result, you will get three rows
  • The second gum is also made across the first
  • You will get something like a cross
We start weaving
We start weaving
  • Continue to wear gum, but already in free places

By the way, there is one secret - the more than more than you will overtake the gum, the more jumpers will be at the ball. Thus, it is possible to do with one elastic band not three rows, and more. When the ball is already sufficient, then the gum can be worn even without twisting.

Work can be continued until the gum ends. Remember that this process is quite long and takes a lot of time, but you can fill your hand and get used to the gum before creating more serious things.

Fruit weaving from rubber

Banana Keychal

Keychain - Banana

Keychain - Banana

This figure is also suitable for newcomers and even children. By the way, fruits are specially popular. They knit easily and interesting, and the greatest advantage is, again, training. To create figures, take black and yellow gum.

Work is performed according to the following scheme:

Scheme of work
Scheme of work
Keychain-strawberry
Keychain-strawberry

Children and adults who learn to work with rubber bands like doing all sorts of bracelets. Fruits are especially interesting. So it is worth talking about one figure - strawberry.

Scheme 1.
Scheme 1.
Scheme 2.
Scheme 2.
Scheme 3.
Scheme 3.
Scheme 4.
Scheme 4.
Scheme 5.
Scheme 5.

Weaving animals from rubber

Separately, it is worth telling about the weaving of animals, because they may not be simple toys, but also real decorations on the handle or pencil. The process is quite interesting and in absolutely everyone.

Owl

Owl from rubberry
Owl from rubberry

Owl looks great on the keys, and she can also decorate the handles on the cabinets. For work requires gum different colors - golden, white, orange, and still black.

Scheme of work Next:

Start of owl
Start of owl
Weaving scheme 2.
Weaving scheme 2.
Cooking rubber bands
Cooking rubber bands
Connect rubber bands
Connect rubber bands

Bunny

Bunny of rubber
Bunny of rubber

This is another interesting pet that is easily created and can be used as a key chain. If you clearly follow the instructions, then you will have a beautiful bunny figurine and it will not be ashamed to even give someone. To do you need to take yellow and black gum.

Execution scheme:

Scheme 1.
Scheme 1.
Making your head
Making your head
We continue weaving
We continue weaving

How to weave the figurines made of rubber on the machine: instruction

Website all kinds of interesting figures with the help of the machine is also very interesting and exciting. Someone with him even easier to weave. You can make any things, key chains, toys, and so on. Even the most simple weaving comes beautifully on it.

Place key rings like many. It is not difficult to do them at all and therefore such a type of weaving is considered the most attractive for many. You can create for yourself and other beautiful things as a gift and can always be kept with you.

The Eiffel Tower
The Eiffel Tower

To create it, take any rubber 40 pieces.

Work is carried out according to the following scheme :

Weaving scheme
Weaving scheme
Scheme 2.
Scheme 2.
Scheme 3.
Scheme 3.

Rozhitsa

Smiley
Smiley

This is a simple, but volumetric figure that can decorate any bundle of keys. Work is performed in black and yellow colors.

Progress:

Scheme 1.
Scheme 1.
Scheme 2.
Scheme 2.

Video: Weaving on the slingshot of bracelet bracelet from rubber. Weaving from rubber.

Добавить комментарий