Metal products do it yourself for sale

Ювелирное изделие из медной проволоки
The desire to produce any product arises from many, metal products with their own hands on sale create beginners and experienced masters. Some have quite interesting developments.

The desire to produce any product arises from many, metal products with their own hands on sale create beginners and experienced masters. Some have quite interesting developments.

What can you concentrate your attention on? How to start the manufacture of products made of steel and color materials? What is claimed today? What products will be in demand in the near future? What instrument need to have at hand? There are many questions. Answer everything is quite difficult. But many potential entrepreneurs will still be acclaimed into the search for their place on the market.

From ideas to the market

The peculiarities of the market are such that the very tiny product may be in demand, and large products in which many thoughts, labor and talent invested, will be unnecessary. Paradoxes in free trade is enough.

Until now, hardware uses the greatest demand.

  1. Nails are bought by kilograms. They are used in the construction, manufacture of other goods, in the production of containers.
  2. Self-tapping screws came to replace nails. The appearance of rechargeable screwdrivers has changed construction technology, furniture production. It is much easier and easier to collect any spatial design on self-drawing, rather than using one-time fastener.
  3. Screws (bolts) and nuts are a fastener connecting separate parts with each other. Establishness is huge. It is difficult to present any production at which threaded hardware is used.
  4. Wire brackets are used jointly by staplers. Mechanical, electrical and pneumatic devices for scabing are used in all spheres of life. A small box with brackets is available in any house. The goods are not fired on the shelves.
  5. Rivets exhaust and threaded with the advent of the tool for a quick connection of parts into finished products help in the production of complex all-point nodes. The range of rivets is constantly expanding.
  6. Electrodes for welding are a soft steel wire covered by protective compositions. Even the usual clay on the surface of the wire rods allows you to weld the details of the electric arc welding.

To start production of hardware, it is enough to purchase automata, for example, a nail machine. It will only be left to refuel the wire from the next roll to the machine and configure the desired nail size. All work in the future goes without human participation.

For the work of the carnival, you will have to acquire a wire and boxes where finished products will be packaged. At the production of nails, one person performs the duties of the director, accountant, master and utility worker. All in one hands. There will be a dilution of goods on shopping points and wait for the results from its implementation.

Not much more complicated equipment for production and other hardware. In a small workshop, and even in the garage, entrepreneurs organize quite modern mini equipment producing in demand.

Who managed to establish the release of hardware at the beginning of the nineties of the last century, he still continues to release them. Small plants export staples, nails, self-tapping screws, screws, bolts and nuts in dozens of countries. Electrodes in the trading network are purchased by tons.

What can offer amateur manufacturer?

When it comes to a spoken of metal products, many potential manufacturers begin to fantasize the manufacture of large spatial structures. Others see themselves as blacksmiths, bunning complex fences or steel flowers.

In fact, metal products are quite extensive:

Copper Wire Jewelry

  • Jewelry production. It is not necessary to use precious metals and alloys to create a claimed product. Most jewelers work with Melchior, bronze, brass and copper. They decorate their works with pebbles collected in the streams and rivers. Jewels and decorations diverge pretty well before the big holidays.

Knife do it yourself

  • Cold weapons are an interesting direction of activity. The demand is permanent. However, the manufacturer is always under the close observation of law enforcement agencies. It is desirable to begin making weapons for the reconstruction of historical events. It is not necessary to spend sharp sharpening, just justities with prototypes are sufficient.

Knight's helmet

  • Production of armor will be in demand in the coming decades. Many clubs are formed, where those who want to join the story are looking for producers capable of making on specified drawings and an ammunition of medieval knights. Product price is quite high. When complying with high quality, demand is quite high.

Metal frame greenhouse

  • The manufacture of metal structures for protected soil is a rather promising activity. Greenhouses and greenhouses made with mind are always needed in country areas. Even animal husbandry in chicken copies on metal frame has more interesting than traditional ways. Rabbit cells from the profile pipe, covered with panels, make it possible to raise fluffy animals quite profitably.

Metal frame stairs

  • Stairs for home are most often made on the basis of a metal frame. The structures solve various ideas of making staircases and railings. Having mastered the technology of calculation and welding, the master will receive a demanded profession for several decades. Individual construction is only gaining tempo. Entrance groups and intermediate stairs will be ordered constantly.

Metal parishion

  • Metal furniture is in demand outdoors. Different types of benches, shops and tables are used in parks, gardens, dachas and household sections. These objects after painting protective coloring compositions can be outdoors. Atmospheric precipitation, temperature change and other natural cataclysms them are not scary. The demand for similar products is always stable, especially in spring and summer.

Profile Pipe Arbor

  • Arbors made of metal - a rather interesting direction of production. Collapsible and welded structures do not require the use of complex technological equipment. Any master who has mastered the features of the use of a corner car and a welding machine, is able to weld the structural elements independently. After painting, ready-made fragments are obtained, they remain only to deliver them to place and collect. Sheet material serves as a roof.

Metal swings

  • Steel swings can take their place near the house. At the heart of the metal frame, as well as the swing installed in the bearings. The device is simple, mastering the manufacture by the skillful person.

Rack for Bulgarian

  • Fixtures for joinery and plumbing tools are in demand. Many masters require simple devices, with their help facilitated the manufacture: hives and components; facades for cabinet furniture; Details for different crafts - and many other things that homemade manufacturers are used in everyday.
  • Garden inventory and tools will buy residents of the village and dackets, if new ideas will be laid in the product, ensuring a decrease in labor costs. Ordinary rippers or tankers will acquire those who have to work on Earth.
  • Agricultural devices for motoblocks and mini-tractors that use more efficient soil processing methods will necessarily be assessed and paid by customers.

To master the manufacture of a particular product, you can read the appropriate books, watch videos and familiarize yourself with the step-by-step guide for the main operations and the tool used.

How to start and develop a business?

You can hear the view that there is a significant initial capital to create your own business empire. Without it, it is impossible to organize a profitable business. But history proves other. With relatively small investments, gigantic conditions and enormous production are created:

  1. Henry Ford began construction of production from a single successive engine on a self-trailer. The sum of only $ 50 was spent, so as not to just design and make the first engine from water pipes, as well as trolleys with steering and brakes. Already with his life (1924), the company produced more than a million cars per year.
  2. Dale Carnegie remained a teacher all his life, but managed to earn more than a billion dollars. He determined correctly as he could offer: taught others to earn money. I earned himself, his heirs who could not recalculate the inheritance for another twenty years.
  3. Michael Rubin began his business from ten years, selling seeds. No initial capital. Then he organized the first snow cleaning company: hired friends to work and agreed with the neighbors that no snowdrift will remain near the houses. An enterprising boy at the age of 12 led a small firm for the guidance of order. At the age of 14 had its own store. Today, the condition is assessed by more than 2 billion dollars.
  4. Sergey Brin was in the United States at the age of five, now he heads Google. Those who want will always find the necessary information.

The main thing is not the presence of initial capital, it is important to desire and try to achieve the fulfillment of your desires. It is necessary to make it all their time and try even in losses to find ways of further development.

There are certain rules to neglect whom it is undesirable. If it is decided to make metal and products from it, you need to decide on the place where the production process will be organized. It will be necessary tool, fixtures and raw materials.

At the initial stage, no mass production is organized, starting from the first experienced models, on which the demand is tested, the limit price of the proposed sample and the wishes of potential customers are determined.

It's time to consider some areas of activity.

Jewelry production

Optionally use precious metals in their work. Copper, bronze, brass and Melchior look quite attractive. These metals can be cast into special forms, creating original products.

Stable demand for buyers for products made by weaving. Various chains, brooches, necklaces and bracelets are decorations in which the openwork wires create unique drawings. Having mastered the complex technology for creating spatial structures, the master will acquire a circle wishing to buy its products. In the future, it is possible to transition to the use of silver and gold as raw materials.

Jewelry manufacturing technology by casting

To familiarize yourself with the features, you need to see the offered photos and explanations to them.

For foundry production on the table will be needed:

  • Overall is a device where billets are made. It creates a form for future casting.
  • Capacity for the preparation of the molding mixture. Here are mixed with different types of plaster and mixed with water.
  • Device for centrifugal casting. Most often is a special chain suspension, which is spinning to force the casting mixture to fill out a form with a certain force.
  • Tool for chopping cast metal.
  • Gas burners - with their help, the layers are heating, molding mixtures and melted metal.
  • Fixtures for making models. In the production of rings (rings) use cylindrical supports of different diameters.

For spatial and flat models, use boards on which the model mixture is put and cut the model;

  • Sets of incisors - with their help cut out the drawing of the future product.
  • Grinding tool for processing models and castings: Files, Nadfili, sandpaper, Borders and other abrasive tools.

To perform casting you need to have:

  1. Foundry mix - if there is copper and lead, then mixing them in different proportions, get bronze. Mixing electrical copper and tin, get brass. Old Melchior Products can become raw materials for the manufacture of products under silver. Some masters acquire brass fittings, cut them and cast their products;
  2. The molding mixture is a special product that uses sand shallow fraction mixed with plaster. Conventional building gypsum will not fit, the shapes and sizes of grains will not allow repeat the complex and fine drawing;
  3. The model wax is a plastic structure from which complex surfaces are cut. This material, slightly heated, can be lined in the right places. Beginner masters use paraffin from candles. Uncomplicated models can be cut from cheap raw materials, but the quality will be low.

Information: Karl Faberge started making jewelry from bronze. At first he cast medals and cigarette. Only having mastered the technology, began to use silver, gold, platinum and aluminum in its work.

Attention! When making foundry mixtures on their own, with lead, tin, zinc, antimony and other heavy metals, you should have exhaust devices to remove vapors.

Step-by-step manual for the manufacture of brass

Attention! Motable models technology. She received such a name because after filling the molding mixture and its frosting, the model wax is paid. Its inside does not remain quite.

There is still a mode of casting on the burned models. In them, the model is made of expanded polystyrene. When pouring molten metal, the model is burned.

Work begins with the preparation of wax mass. It is heated. At a temperature of 62 ... 65 ° C wax melts. It is heated slightly above, up to about 70 ° C so that it remains longer in the molten state.

Model mixture

A wax is applied to the surface of the template of a certain diameter. A good wizard usually has a set of templates to make the opportunity to make rings and rings for different customers. The minimum size is 12 mm, and the maximum is 28 mm.

In the future, all work on the preparation of the model is carried out on the surface of the template. The wax is cut on the form of the future product. The main surface form a drawing.

If you need to fix the stone in the subsequent, then the models create small mustache. They will be held the stone on the front surface of Parsny.

Model Wax

The template allows you to work so that the master does not concern wax with hands. Therefore, there are no traces from the fingers on the surface. Having a set of incisors, skillful masters cut out a convex or concave drawing. So make robusts with sealing.

Beginning of the manufacturer of Persden model

When working out the model, it will be consistent with the customer. Then it will be the product that is approved in the order. Sometimes the master does not alone, but several models. In the future, one or more is selected, which will be cast from metal. The work is quite complicated, so this stage of work is negotiated and paid separately. Each new model is a new product to spend time.

Finished model

Attention! You can design a product in three-dimensional modeling programs and make a model on a three-dimensional print printer.

After studying all the elements of the future product, the model is removed from the mandrel. It is necessary to make a gateway system. It will be needed for the subsequent pouring of the metal. Provide the presence of sufficient volume for the melted mass. It should be with an excess.

Network system

As a basis for the manufacture of the sprue, ordinary plasticine is taken. Pouring produce minimally through two holes. One molded, and the second serves as a discharge - the air outlet. Properly position them at different heights. To form holes, a thick wire is used.

Installation of the model

The rods before installing the model are slightly heated. Then it easier to sit down in place. The cast hole is trying to do lower, and the damage is slightly higher. Its filling will occur with the reverse movement of the metal at the time of filling the space.

Model in front of molding

Oversal is put on the grievous system. A dense installation will not allow the molding mixture.

Installation set

Inside the proclutions it is clear that the model does not concern the walls of the solar. When pouring, the product deformation will not occur.

View inside the opoki

The molding mixture is mixed with water. Get a solution that needs to be pouring into the whole.

Preparation of molding mixture

When filling, it is desirable to install an opera on vibrationtol. Then air bubbles will be removed from the mass flowable. The absence of bubbles will provide an opportunity to get a solid form without defects. It remains to wait when the gypsum present solidifies.

Filling of molding mix

From the layers remove the gateway system. Now the wires are visible responsible for the fill of the metal.

Removal of faces

Remove wire. Through small holes will be access for metal. But while there is a model inside there. Its on all sides fit the frozen molding mixture. When removing the wire, try to act neatly so as not to damage the workpiece.

No sprues

After removing all the auxiliary elements, the shape warming begins and the wax removal from it. Opoku turn over the bottom. Put on the dishes where the wax will follow.

Wax paying

When the wax came out, the cavity for metal is formed inside. It is provided for the fill with a centrifugal casting under pressure. A special device in the form of a box and chain is used. Opoku will have to rotate with his hands so that the metal of the centrifugal force is fully penetrated into the most remote spaces.

Centrifugal casting

Heating is carried out in a centrifugal casting device.

Overall inside the device

Attention! At home, other casting methods are used. Many jewelers use halves of potatoes. When there is a molten metal, then the focus is covered with potato and with an effort pressed to the layer. Bottom High temperature Over 800 ... 900 ⁰c. Moisture evaporates from the surface of the potatoes. The formed pairs of pressure presses on the molten metal. It penetrates the most distant parts of the form.

Metal melting

When all the free moisture is evaporated from the form, and the temperature is reached close to the melting point of the poured metal (about 850 ° C), it is placed on the spruce piece of brass (melchior, copper, bronze or other material).

Owlock spout

The melted metal flows into the form. Now you need to push it inside. Begin to spin fixture for centrifugal casting. Wizards using couples apply potatoes and wait for steam to produce metal inside.

Twist accounts for a short time (about two minutes). Metal fluidity decreases quickly. You need to wait for the products of the product inside the form. The temperature difference of the device and the surround air is high, so after 5 ... 8 minutes the casting will become solid.

Cooling Opoka

It is possible to destroy the plaster and remove it from the layers, waiting for cooling. So come when casting products made of gold. With a quick cooler, the form particle may damage soft metal.

In cold water for a few seconds, the form collaps itself, and the product will be released. It is easy to get it.

Casting

The remnants of the spruce system are visible on the casting. Blinds bite the surplus. They can be reused. When using expensive metal, a jigsik is used, they repeated sprues.

Ran.

Immediately cast the item looks unattractive. It is treated with sandpaper, polished. Give a commodity view. If necessary, the shtihels make a refinement of the picture, giving it even greater convexity. A skillful wizards make a shallow mesh, which will stronger the texture effect.

We refine size. After casting, it is possible to reduce the diameter of pisces. You can simply constrain the surplus inside with files or appliances. Dorny (tool made of solid material of a specified size, for example, bearing balls), which are driven through the holes are used.

With the help of polishing circles, the surface is treated, a high-quality product is obtained.

Sulfuric black

On products where copper is present, gray is carried out. It helps to see the drawing depth. The easiest to use the sulfur ointment acquired in the pharmacy.

Firing sulfur

The firing at a temperature of 250 ... 280 ⁰ is achieved by evaporation of oil. Sulfur film settles in the depressions. Surplus on convex places are removed by polishing using polishing pastes.

View of Persny.

The finished product from the metal is investigated for defects. If there is no, then you can give the customer and receive payment for the executed order.

Ringer on the finger

Video: Decorative metal elements.

Other types of own production for profit

Studying step-by-step technologies, you can master several different professions on the manufacture of goods from metal.

Individual production issues are quite interesting. For an active person, the direction will always be found, which will be a matter of life in the future.

Republished by Blog Post Promoter

Crafts from ironTo decorate the interior or exterior of your home, it is not necessary to purchase various stores of trinkets. To this end, articles made of metal made using welding or other methods will be perfectly cope. Moreover, this craft is accessible to each wishes, because it is enough just to follow the instructions, and all the necessary tools can be found at hand.

Metal Homemade Production Technology

Metal products do it yourselfThere are several different manufacturing technologies, and you can choose any of them by pushing out personal preferences, knowledge and opportunities. All that can be made of metal is always closely related to the manufacturer.

As is known, With a metal And small efforts can be made attractive and practical almost any design. This includes various benches, cornices, furniture and other interior items.

Since the crafts from iron refer to manual work, their cost in stores is quite high, so much easier will independently master this craft and save their money. The only thing that you have to spend - this is Materials for manufacture .

First of all, you need to choose the direction you like, in which you will work. Especially often needed devices for bending and forging, stamping, cutting, chasing. After that, the drawing of future crafts and the necessary materials are prepared.

There is a whole list of various methods using which you can do Metal product with their own hands For sale or for personal use.

  1. How to make a handicraft made of metal with your own handsCasting. Here it is necessary to purchase a special form in which the liquid alloy is poured.
  2. Forging. It will take a hammer or press with which actions with a heated metal are produced to change its shape.
  3. Bend. In this method, the principle is similar to a forging, but is at the base of the gluing and welding of different elements, collecting the overall design.
  4. Diffoff. This technique implies the use of thin sheets of metal and a hammer, with which the necessary form is attached.
  5. Stamping and cutting. A fairly simple mechanism for working with special technique, which allows without any effort to change the shape of metal elements.
  6. Filigree. Various wires take the necessary form, after which the master is soldered.
  7. Chacking. One of the most simple methods implying placement in the workpiece of the tool to which the hammer is affected. Thus, the form of the product changes.

Products from thin metalAs for the drawing of the design, it can be made manually on paper or using specialized computer programs that can be found in a wide range throughout the Internet.

In principle, you can do without a scheme, if we are talking about simple products. But for large objects by type of gate, lattices and their similar drawing is essential.

Simple products

Figures from metallomaIf you have never been engaged in a similar craft, it is best to start with the manufacture of simpler iron products. For this you do not need to have special skills and experience in this area. Simply Adhere to the described instructions And everything will work out.

Casket

Such a drawing is not only beautiful Decor of the room , but also a useful thing. Therefore, you can start with it. Prepare all tools:

  • Crafts made of ironscissors;
  • line;
  • sandpaper;
  • pen or pencil;
  • the firm basis that you will use as a work surface;
  • paper for drawing paper;
  • Any tune bank.

First you need to clear the can from paint. For this need sandpaper . It is best to perform a stage when the tin is not yet open, otherwise the random probability appears. Deforming material and it is extremely undesirable.

Then you need to cut the bank as follows: Remove the bottom, and the upper part is cut along. With the help of sandpaper to apply all irregularities and sharp sections of sections. This will help give the product a more accurate look, as well as avoid cuts.

Now you need to apply the pattern. Here is complete freedom of choice. You can use any accessories and draw such a picture that you like.

After that, it remains only to collect fake on the drawing and find a suitable place for it.

If you have experience in handling the welding machine, then after making a box, you can take up a more complex design - a metal owl. For this, you will need the following tools:

  • Crafts from iron by weldingpaper for drawings;
  • pencil;
  • cardboard;
  • scissors;
  • Thin metal;
  • Bulgarian;
  • a hammer;
  • chisel;
  • welding equipment;
  • any washers and bolts;
  • steel bars;
  • wire.

Crafts made from metal sheetsFirst you need to make a sketch of the owl pencil on paper, how the future handicraft will look like. Therefore, attach maximum efforts to create a beautiful picture. Then you need to transfer the drawing to the cardboard.

Now it will be necessary for the Bulgarian and a thin metal. For owls, it is necessary to have materials for eyes, torso with feathers, wings and tail. It all cuts out of iron parts with a grinder:

  1. When creating an eye, try to make holes in them in which the bolts will be inserted.
  2. On the perimeter of the torso, make notches that will create the effect of the Owl's plumage. For this, it is necessary to chisel.
  3. A piece of bent metal can be served as a beak.
  4. When creating a paw, use various rods by connecting them using welding.

After the manufacture of all parts of the owl separately, combine them with the welding machine. In general, at this stage, the product is already ready, it remains only to apply painting and process the owl special varnish. You can add your items.

Cold forging

If you have a press, you can do cold forging. With its help you can create more interesting and attractive Designs for decoration . This method is simple, but for it requires special tools that will be found not from every craftsman:

  1. Bluck for performing bends.
  2. Snail for deformation of the iron sheet.
  3. Lantern for weave.
  4. Wave for making wavy patterns.
  5. Twister for twist the rods among themselves. This will allow you to create spiral elements.

As in other cases, the first thing is prepared a sketch or scheme. After the stage of manufacturing elements of the overall design is begins separately. As in the case of the owl, the welding will be welded for the final association of all parts.

Crafts of welders do it yourselfNow all the seams are eliminated, with the help of sandpaper, the whole design is grouped, a special varnish is applied at the end. Design ready.

As you can see to decorate your home or cottage, it is very necessary to buy expensive decor elements, sufficiently a little effort for the invention of your crafts. Of course, if you do not have at least minimal skills to make such structures, everything will be not so simple. But starting with simple options, it is gradually possible to achieve serious heights in this craft.

Metal - durable and strong material from which stylish and durable crafts are obtained.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Metal decor elements are used in interior design and emphasize the mastery of the owner of the house.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Metal, kids who can do to help in the process of making crafts, for example, coloring finished products or come up with and draw sketch based on ideas for crafts to create.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools Metal products for sale: how to make with your own hands using welding, necessary materials and tools Metal products for sale: how to make with your own hands using welding, necessary materials and tools

The advantage of crafts from metal is the availability of materials. The paper uses any technicraft details: screws, washers, nails, old appliances with a metal mechanism, and much more.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Currently, metallic fences, doors, fences that can be supplemented with wrist patterns or toys from metal parts are popular.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Materials and tools

The following devices and materials will be needed:

  • paper and pencil for creating sketch;
  • welding device;
  • a hammer;
  • Bulgarian for cutting for metal;
  • Means for dissolving rust;
  • sharp scissors;
  • washers and bolts for decoration;
  • rods made of various lengths;
  • Head of iron.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

A specific set of materials depends on the type of craft.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Prepare all the details in advance, if necessary, the surface of the iron is treated with a special tool from rust so that the surface is clean - thanks to this, the finished handicraft will not cover rust and will continue for a long time.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Metal owl

  1. Prepare a template for owls, drawing it with a pencil or printing on a sheet of paper.
  2. Cut out the contour of the shape and attach to a metal sheet, circle a silhouette with a pencil.
  3. With the help of a grinder neatly cut the edges of the workpiece.

    Drill drill holes for fastening the future craft and to create an eye.

  4. Make a paws from a metal twist, giving them an appropriate curved shape.
  5. Treat the surface of the owl with a special solution and paint.

Rose from Steel

Prepare the following tools:

  • welding machine;
  • a hammer;
  • Bulgarian;
  • paint for metal surfaces;
  • Stone sharpening;
  • pliers;
  • wire;
  • Scissors for cutting metal.

Step-by-step instruction:

  1. Cut from the steel sheet of petals for roses - the more, the more magnificent is a bud. Make them of different sizes: for the lower tier flower - larger, and then less and shorter, so that in the center it turned out a rolled bud.
  2. Sharp edges of petals process with a grinding stone so that they become smooth and smooth to the touch.
  3. Steel twist twist in the form of a spiral with pliers.
  4. We weld the petals of the base down to each other, folding in the form of roses.
  5. Rosette can be supplemented with spikes and leaves - two leaflers on each stem from different sides.
  6. Cover the finished craft, for example, a silver shade.

Simple metal toys

  • Some crafts can be created from undergraduated metal materials without using special tools for welding and cutting metal sheets.
  • It uses wire, screws, washers, nuts and other small parts that can be glued or twisted with each other with children.

Dog from boltikov

  1. Take a large nut and glue to it with hot welding or adhesive guns Four inverted bolts. It turns out the workpiece of the body with legs.
  2. Make a muzzle from a short wide screw, gluing it with a foot to the front of the top of the body, slightly lifting the head up at an angle.
  3. Make the eyes from small nuts, attaching them from above behind the head of the screw depicting the face.
  4. Give the figure to the look of the puppy, sticking the tail and ears.
  5. With the help of such a base, other animals can be made - a kitty, horse, elephant, complementing the billet for the body with the corresponding elements in the form of the ears, nose, etc.

    d.

Machine

Prepare materials for making crafts. You will need 4 small wheels, metal parts for body and additional parts for decoration: headlights, exhaust pipe, seats of chairs. The more the detailing of the car, the more beautiful and more realistic will be an exercise.

  1. Watch the process of creating a toy car will appeal both boys and girls.
  2. Case machines can be gathered in advance, cook items or glue.
  3. Wheels Attach the workpiece, cover additional decor elements.
  4. The finished typewriter can be covered with varnish or paint.

Butterfly from the wire

  • The technology of creating this craft is very simple and suitable for making together with children.
  • In this case, the work consists in twisting the wire in the form of curved parts for the wings and butterfly mustache.
  • The wire must be durable, but quite flexible, so as not to break in the process and easily took the necessary form by hand.
  • Wings Make from twisted oval, decoring them with a patterned ornament in the form of curls and spirals.
  • As a torso, take a piece of wire thickening or twist a few thin wires with each other in the form of a torso.
  • Make a mustache from thin twisted pieces of the wire thread and attach a butterfly on the head.
  • Cover with colored paint or transparent varnish.

Other insects are created by such a technique, for example, dragonflies. They differ from the butterfly of a larger body and thin elongated wings.

  1. It is important not to forget about the precautionary measures when working with instruments such as Bulgaria and welding, be sure to use protective equipment - mask, gloves.

Photo ideas of homemade crafts from metal

Unusual trees made of wood with their own hands - views, ideas, photo examples

A source: https://podelki.guru/podelki-iz-metalla

How and what products from metal can be made for sale with your own hands?

The desire to produce any product arises from many, metal products with their own hands on sale create beginners and experienced masters. Some have quite interesting developments.

What can you concentrate your attention on? How to start the manufacture of products made of steel and color materials? What is claimed today? What products will be in demand in the near future? What instrument need to have at hand? There are many questions. Answer everything is quite difficult. But many potential entrepreneurs will still be acclaimed into the search for their place on the market.

From ideas to the market

The peculiarities of the market are such that the very tiny product may be in demand, and large products in which many thoughts, labor and talent invested, will be unnecessary. Paradoxes in free trade is enough.

Until now, hardware uses the greatest demand.

  1. Nails are bought by kilograms. They are used in the construction, manufacture of other goods, in the production of containers.
  2. Self-tapping screws came to replace nails. The appearance of rechargeable screwdrivers has changed construction technology, furniture production. It is much easier and easier to collect any spatial design on self-drawing, rather than using one-time fastener.
  3. Screws (bolts) and nuts are a fastener connecting separate parts with each other. Establishness is huge. It is difficult to present any production at which threaded hardware is used.
  4. Wire brackets are used jointly by staplers. Mechanical, electrical and pneumatic devices for scabing are used in all spheres of life. A small box with brackets is available in any house. The goods are not fired on the shelves.
  5. Rivets exhaust and threaded with the advent of the tool for a quick connection of parts into finished products help in the production of complex all-point nodes. The range of rivets is constantly expanding.
  6. Electrodes for welding are a soft steel wire covered by protective compositions. Even the usual clay on the surface of the wire rods allows you to weld the details of the electric arc welding.

To start production of hardware, it is enough to purchase automata, for example, a nail machine. It will only be left to refuel the wire from the next roll to the machine and configure the desired nail size. All work in the future goes without human participation.

For the work of the carnival, you will have to acquire a wire and boxes where finished products will be packaged. At the production of nails, one person performs the duties of the director, accountant, master and utility worker. All in one hands. There will be a dilution of goods on shopping points and wait for the results from its implementation.

Not much more complicated equipment for production and other hardware. In a small workshop, and even in the garage, entrepreneurs organize quite modern mini equipment producing in demand.

Who managed to establish the release of hardware at the beginning of the nineties of the last century, he still continues to release them. Small plants export staples, nails, self-tapping screws, screws, bolts and nuts in dozens of countries. Electrodes in the trading network are purchased by tons.

What can offer amateur manufacturer?

When it comes to a spoken of metal products, many potential manufacturers begin to fantasize the manufacture of large spatial structures. Others see themselves as blacksmiths, bunning complex fences or steel flowers.

In fact, metal products are quite extensive:

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • Jewelry production. It is not necessary to use precious metals and alloys to create a claimed product. Most jewelers work with Melchior, bronze, brass and copper. They decorate their works with pebbles collected in the streams and rivers. Jewels and decorations diverge pretty well before the big holidays.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • Cold weapons are an interesting direction of activity. The demand is permanent. However, the manufacturer is always under the close observation of law enforcement agencies. It is desirable to begin making weapons for the reconstruction of historical events. It is not necessary to spend sharp sharpening, just justities with prototypes are sufficient.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • Production of armor will be in demand in the coming decades. Many clubs are formed, where those who want to join the story are looking for producers capable of making on specified drawings and an ammunition of medieval knights. Product price is quite high. When complying with high quality, demand is quite high.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • The manufacture of metal structures for protected soil is a rather promising activity. Greenhouses and greenhouses made with mind are always needed in country areas. Even animal husbandry in chicken copies on metal frame has more interesting than traditional ways. Rabbit cells from the profile pipe, covered with panels, make it possible to raise fluffy animals quite profitably.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • Stairs for home are most often made on the basis of a metal frame. The structures solve various ideas of making staircases and railings. Having mastered the technology of calculation and welding, the master will receive a demanded profession for several decades. Individual construction is only gaining tempo. Entrance groups and intermediate stairs will be ordered constantly.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • Metal furniture is in demand outdoors. Different types of benches, shops and tables are used in parks, gardens, dachas and household sections. These objects after painting protective coloring compositions can be outdoors. Atmospheric precipitation, temperature change and other natural cataclysms them are not scary. The demand for similar products is always stable, especially in spring and summer.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • Arbors made of metal - a rather interesting direction of production. Collapsible and welded structures do not require the use of complex technological equipment. Any master who has mastered the features of the use of a corner car and a welding machine, is able to weld the structural elements independently. After painting, ready-made fragments are obtained, they remain only to deliver them to place and collect. Sheet material serves as a roof.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • Steel swings can take their place near the house. At the heart of the metal frame, as well as the swing installed in the bearings. The device is simple, mastering the manufacture by the skillful person.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • Fixtures for joinery and plumbing tools are in demand. Many masters require simple devices, with their help facilitated the manufacture: hives and components; facades for cabinet furniture; Details for different crafts - and many other things that homemade manufacturers are used in everyday.
  • Garden inventory and tools will buy residents of the village and dackets, if new ideas will be laid in the product, ensuring a decrease in labor costs. Ordinary rippers or tankers will acquire those who have to work on Earth.
  • Agricultural devices for motoblocks and mini-tractors that use more efficient soil processing methods will necessarily be assessed and paid by customers.

To master the manufacture of a particular product, you can read the appropriate books, watch videos and familiarize yourself with the step-by-step guide for the main operations and the tool used.

How to start and develop a business?

You can hear the view that there is a significant initial capital to create your own business empire. Without it, it is impossible to organize a profitable business. But history proves other. With relatively small investments, gigantic conditions and enormous production are created:

  1. Henry Ford began construction of production from a single successive engine on a self-trailer. The sum of only $ 50 was spent, so as not to just design and make the first engine from water pipes, as well as trolleys with steering and brakes. Already with his life (1924), the company produced more than a million cars per year.
  2. Dale Carnegie remained a teacher all his life, but managed to earn more than a billion dollars. He determined correctly as he could offer: taught others to earn money. I earned himself, his heirs who could not recalculate the inheritance for another twenty years.
  3. Michael Rubin began his business from ten years, selling seeds. No initial capital. Then he organized the first snow cleaning company: hired friends to work and agreed with the neighbors that no snowdrift will remain near the houses. An enterprising boy at the age of 12 led a small firm for the guidance of order. At the age of 14 had its own store. Today, the condition is assessed by more than 2 billion dollars.

A source: https://metmastanki.ru/izdeliya-iz-metalla-svoimi-rukami-na-prodazhu.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Metal products for sale: how to make with your own hands using welding, necessary materials and toolsDecorate the interior of the housing Or a country house can not only with purchased accessories, but also with metal products that are made personally. This is unfortunately for everyone, since the minimum set of knowledge and tools will be required. Such things are able to decorate any interior.

Thinking about creating such objects, everyone has the opportunity to choose for themselves production technology, focusing on their knowledge and experience.

In each case, the selected technique will assume certain costs necessary for the manufacture or acquisition of special equipment. In the forces of everyone, produce a mass of various products from metal, decorate with their help room or garden.

It can be different Decorative elements or Forged bridges , as well as crafts or Objects of furniture .

Manufacturing technology

Production of metal products today is a very popular view of earnings. Metal items created by their own hands are able to make any design more attractive. I can relate to them:

  • eaves;
  • benches;
  • furniture items.

Moreover, the wizard can choose the style of her wishes, paying particular attention to the thing that the thing in any room looked harmoniously. In the outlets, metal products are exhibited by fairly high rates, in view of the fact that they are made by hand.

However, if desired, it becomes possible to master the science of creating such objects on their own. Metal products, firstly, quite appreciated in certain markets, and secondly, it will be possible to save decent amounts.

The only costs of costs may be associated with the acquisition of materials.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

  • filigree ;
  • cutting;
  • bending ;
  • forging;
  • stamping;
  • Checkanka .

After it is prepared: the drawing or scheme of the product, the necessary materials, the master will be ready to implement the design of the creation of a beautiful and unusual product.

Metal is the material on the basis of which it becomes possible to create a whole composition of all sorts of crafts for home or garden. For this reason, many methods have been developed that allow you to create very original things at home.

Metal methods for creating metal products

  1. Casting . The essence of the introduced equipment is that the liquid alloy fills the special form. Thoroughly, the material turns into a heavy-duty and beautiful thing or object.
  2. Forging .

    This method is based on the impact on the pre-prepared workpiece in various ways: hammer, temperature, press and other deformation techniques.

  3. Bend. This technique is largely identical to the forging, only it is based on the welding and bumping of structural elements.
  4. Diphovka . For this method, the use of a hammer in the work is characterized by which thin iron sheets give the necessary form.
  5. Cutting and stamping. Applying this technique, you can transform the shape of the workpiece without any particular efforts, as well as make holes.
  6. Filigree . The presented method involves the use of smooth or cast wire as a raw material, from which the product is performed by soldering the curved components of the pattern.
  7. Chacking.

    This processing method is characterized by the simplicity of the embodiment, and its essence is to be placed on the preparation of a special tool to which the hammer should be affected. Thus, the form of the product changes.

How to make drawing

There are several ways to make a drawing for metal products. It can be created independently or with the help of special computer programs.

With the help of the drawing, you can determine in advance how much material is required for the manufacture of things. First of all, without it, do not do in the manufacture of large items, for example, lattices or gates. Having a ready-made sketch, the master will be easier to determine even before the start of the work of the harmony of the presence of the product obtained in the selected place.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Necessary work tools

As a basis for creating a metal box, an ordinary tin can can be seen. For the manufacture of the box, the following devices and things will need:

  • Sandpaper.
  • Scissors.
  • Line.
  • Pencil and pen.
  • The solid foundation that will be used as a working plane.
  • Paper that will serve as a basis for creating a drawing.

The process of making a casket starts with cleaning the outside of the cans from paint and labels, for this apply sandpaper. It is recommended to perform an operation with a filled bank. Otherwise, it is necessary to perform such training extremely carefully, as the metal can be easily deformed.

Next, proceed to cut the banks to do so as to get a billet of a quadrangular shape. Before that you need:

  • Cut off the bottom, after which cut along the upper part. In the process of this operation, irregularities are formed on the edges that you need immediately need to stall.
  • Next, the bank must be placed on a solid surface. At this stage of work, you can start the pencil to begin to apply images that are drawn in advance in the drawing.
  • Then proceed directly to the creation of the ornament.
  • The wizard has no prohibitions or any restrictions in the choice of decorations for the box, but still better apply symmetric parts.

To create a pattern, you will need a ballpoint pen, with which you can sell an aluminum layer. You can achieve the effect of a pronounced texture if it is possible to spend several times with a handle by the contour of the pattern. Having done the entire specified work, the master will remain collecting all the details of the box together.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

To create it, you need to prepare the following tools:

  • paper;
  • pencil;
  • Bulgarian;
  • a hammer;
  • Thin metal;
  • cardboard;
  • scissors;
  • chisel;
  • Welding equipment;
  • bolts and washers;
  • Steel wire or bar.

At the first stage, a sketch of owls should be depicted on paper, after which it is repeated on cardboard. Thus, the process of cutting separate components of the crafts is significantly simplified. For the manufacture of metal owls will have to make eyes, torso, feathers, tail and wings. To make it easier to cut the parts for metal, it is recommended to use the grinder.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Paws can be performed by connecting parts of metal rods with each other, using welding for this purpose. Part of the bent metal is used to create beak.

Paws and beak should be welded at the very end of the product assembly phase. When all the details are in their places, the owl can additionally decorate by exposing to a special varnish.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

This contributes to the manifestation of the structure of tin, which looks like crystals. To perform frost patterns, tin cans will need, since there are already a layer of tin on their surface.

Perform the drawing in the following way.

A candle will need, over which one must hold individual parts of the metal for some time. The incandescence of banks should pass for a strictly defined time. If it is not sustaining it and heat longer, it will lead to a sparrel of the product. The main goal that needs to achieve during the heating of the tin layer will allow it to manifest.

The frosty pattern of metal can be done if you first place the tin on the plane of the steel plate, and then it is melted or heat it. For this task, the burner is suitable: due to a stable flame, you can easily administer the desired section of the tin. As tin is heated, you can detect how the shine appears on it, which disappears for a few seconds.

It is necessary to try to treat the metal sheet so that the sections of it are heated unevenly, because, otherwise, a uncompresentant pattern can be obtained.

To give the workpiece the original look, make a unique pattern, you need to warm up the sheet in the corners. When the desired drawing is obtained, it is necessary to quickly reduce the temperature of the metal sheet. To do this, it needs to be dipped into cold water or spray.

In order for the resulting pattern to the maximum clearly visible on the sheet, its surface can be added to the hydrochloric acid. It is important to comply with security techniques. Prepare a tool - a wand to which a cotton swab is attached. Often, after warming up the metal, the wizard does not succeed in achieving the required gap.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

For decoration, you can use wax paints. They need to process certain parts of the metal sheet, after that they should warm them. Secure the drawing created on the bank can be covered with a special varnish. It will be even better if you apply a color transparent varnish from above. The manufactured thing will look even more original.

You can decorate your home not only with modern fashionable accessories and beautiful trifles that are in the wide range of stores in stores.

If you wish, you can make metal things and items that will look no worse.

Of course, in the absence of skills manufacturer of such products, it is possible that the first owl, a box or another thing, performed by itself, will not be so beautiful.

However, as the beginning of his skills is honed, even a beginner master will be easier to cope with this task, and after some time it will not be difficult to create more complex things. This will turn your hobby into a fairly profitable occupation. After all, the exhibited metal products created by their own hands are very high.

A source: https://tokar.guru/metally/izgotovlenie-izdeliy-iz-metalla-svoimi-rukami.html

How to make crafts from metal do it yourself

Metal products for sale: how to make with your own hands using welding, necessary materials and toolsCreate crafts for a metal garden with welding with your own hands is not difficult, even if you are new to this business and have no experience at all. The basic requirement is compliance with security rules.

Metal products with welding will be very useful in private homes or dachas. Such structures will be well applicable to erecting the fence, gazebos, canopy and for all sorts of decorations of the territory around the house.

Welding appliances for household work

The first thing to be done before starting to make crafts, using the welding method - to get a good welding machine. In domestic and home conditions, in contrast to industrial, strict requirements for the quality of the compounds are not imposed. Therefore, in order to create crafts from iron and metal products, you can use a transformer or an inverter.

Both devices are distinguished from both the disadvantages.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

The transformer is a large device large enough.

Weighs such equipment a lot, so welding takes a lot of time and effort, especially when the equipment needs to be moved over long distances.

For example, if you build fence or other overall products made of iron or metal. The next minus is that the electrical network is exposed to a large load.

The advantage of transformer equipment is that its design is simple, which means that the assembly does not take a long time

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

The inverter is an apparatus, the design of which is more complicated, so it will not be possible to assemble it. Functioning such equipment on the principle to work both with steel and with various non-ferrous metals.

The manufacturing technology involves the use of a small transformer, which is characterized by compact dimensions and a low weight.

The inverter consumes a small amount of electricity and can be connected to generators.

Basics

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Before you begin to make crafts with your own hands with welding, you need to get acquainted with the Aza of welding.

At the beginning you need to gain experience and practice in a piece of unnecessary metal. At the initial stage of the manufacture of welded joints, it is worth learn to light the arc and hold it, while withsting the constant working gap between the workpiece and the electrode.

The next thing you need to fill your hand is the technique of creating a weld. After you have finished and seams, you have smooth, you can proceed to the current adjustment for different parts of parts subjected to welding.

Welding is a technique by which two metal parts are connected. The process is to melting their surfaces at dusting point

Elements are welded in one whole design due to the layer of the binder material of the electrode. The current selection should be carried out in such a way that only the top layer of the product melted, otherwise holes may form.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Material

Surely every owner of a private house or cottage in the farm there are metal remains. For example, you mounted a gas pipeline, a system of heating or water supply, you have unused pipes or just pieces of metal, segments of reinforcement, nails, nuts, bolts, etc.

Of all these, it would seem unnecessary, parts can be made of excellent crafts that will find their use on your site.

Many users often use such material and repair. Explore your garage well, maybe there is an old garden inventory, dishes, spare parts from a car or bicycle. All this can also come in handy.

Metal crafts for giving

As already noted, it is possible to make your site with a cozy and pleasing eye without buying a new inventory. Using old metal or iron, you can construct a good base for a bench or table bench. You can make a tabletop, a bench board, swing and many other useful things for the cottage.

Love spend your free time on kebabs - you can make a brand from the old steel barrel. Make it you can disassemble in order to have the opportunity to transport from one place to another.

You can create it yourself by the grinder and drill. However, the most optimal option will be the use of a welding machine.

So, the process of creating a design will be faster and easy.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

An excellent decoration of the garden becomes sculptures. There are no borders here for fantasy. You can create anything. For this, all sorts of metal, concrete, gypsum parts are suitable.

If you have a welding machine, a pack of electrodes and the most important thing - the desire to create and create, then you can build an original composition that will take a worthy place on your site by making it more attractive.

Today, interesting design ideas from metal crafts can be found both in specialized publications and sites dedicated to the decoration of country sites, and come up with himself.

In any case, handicrafts made of metal with their own hands, even created by the existing drawing will be unique, because Welding is first of all creativity.

Any welded seam made by a certain person and fulfilled with a certain decorative design will be considered a kind of masterpiece. Therefore, inspire, invent and embody your ideas.

Metal products for sale: how to make with your own hands using welding, necessary materials and tools

Safety technique

In order for welding work successfully and without incident, do not neglect the safety rules.

Be careful! In no case, it is impossible to start welding without a mask or a shield, because There is a risk of obtaining ultraviolet irradiation.

Work in a protective suit and gloves. So you will be protected from split sparks and splashes of molten metal.

A source: https://svarkaed.ru/svarka/izdeliya-i-konstruktsii/kak-sdelat-podelki-iz-metalla-svoimi--typami.html.

Products for home made of metal with your own hands for sale: manufacturing technologies, ideas of things

Thinking about creating such objects, everyone can pick up for themselves manufacturing technology , focusing on your experience and knowledge. Although in each case the selected technique will require certain costs necessary for the acquisition or manufacture of special equipment.

In the forces of everyone to create a lot of various products made of metal, arrange with their help. It can be both crafts and furniture items and various decorative bridges and forging elements.

Metal Production Technology

In stores, metal products are offered at fairly high prices due to the fact that they are made by the manual method. However, if desired, you can master the science of creating these items yourself, thanks to which it will be possible Save on this considerable amounts . The only costs that may arise here will be associated with the purchase of materials.

To create metal patterns and details, you can choose any technique you like. Pretty common among them are forging, stamping, cutting, bending, chasing and filigree. After the scheme or drawing of the product is obtained, and the necessary materials are prepared, the person will be ready for the implementation of the plan to create an unusual and beautiful product.

The metal is the material, on the basis of which you can create a whole composition of a variety of crafts for the garden.

Therefore, there are many different methods that allow you to create at home Pretty original things:

  • Casting. The essence of this technique is filling with a liquid alloy of a special form.
  • Forging. This method is based on the impact on the workpiece with the help of hammer, temperature, press and other methods of deformation.
  • Bending This technique is largely similar to the forging, it is based on the bumping and welding of the items of the product.
  • Diffoff. For this method, the use of hammer is characterized, with which the necessary forms are given to thin sheets of iron.
  • Stamping and cutting. Using this technique, it is possible to change the shape of the workpiece without much effort, as well as create holes.
  • Filigree. This method involves the use of cast or smooth wire as raw materials, from which the product is created by soldering the curved pattern elements.
  • Chacking. This processing method is characterized by simplicity performed, and its essence is to be placed on the workpiece of a special tool, which affect the hammer, thereby changing the shape of the product.

There are several ways to make Metal product drawing . It can be developed manually or take advantage of special computer programs. Thanks to the drawing, you can learn in advance how much material needs to create things.

First of all, without it, it is not necessary to do those who plan to produce large items, for example, a gate, grid. Having ready-made sketch on her hands, the master will easier to understand even before the start of work, how harmonious this product will look in the place chosen for its placement.

Metal simple things

If you do not have experience in making such things with your own hands, then you are recommended to start with the creation of the simplest metal items. Such can perform a metal box, which can act as not only with a decorative element, but also to perform practical functions.

Required tools

As the basis for her suitable Normal Tin Bank . To make such a casket, you will need to prepare a number of instruments:

  • Sandpaper;
  • Scissors;
  • Line;
  • Pen and pencil;
  • Solid foundation that will be used as a working surface;
  • Paper that will serve as a basis for drawing drawing.

The process of manufacturing do-it-yourself caskets from cleaning the surface of a paint can Use sandy paper . It is advisable to perform an operation when the bank remains still filled. Otherwise, it will have to do this preparation as much as possible, because if the metal is deformed, then you can hardly make a beautiful casket.

After that, you begin cutting banks: it is necessary to do this in such a way that the billet is rectangular shape. Prior to this, it is necessary to cut off the bottom, after which the upper part is cut along. In the process of this operation, irregularities will appear on the edges, which are desirable immediately to appeal.

Next, it must be placed on a solid surface, where the images contained in the drawing are already applied using a pencil. After that, they start directly to the creation of a pattern. You will not have restrictions in the choice of decoration for the box, but it is advisable to still use symmetric details.

To create a pattern The ballpoint should be required With the help of which you can easily sell aluminum. It is possible to achieve a pronounced effect of pronounced texture if you spend more than once along the circuit lines. By completing the stages listed above, you will only need to assemble the casket.

If there are welding equipment and the skills of handling it, you can make with your own hands a very beautiful metal owl. In addition, you will have to Prepare the following tools:

  • Paper;
  • Pencil;
  • Cardboard;
  • Scissors;
  • Thin metal;
  • Bulgarian;
  • A hammer;
  • Chisel;
  • Welding equipment;
  • Washers and bolts;
  • Steel bars or wire.

At the first stage it is necessary portray on paper sketch owls , after which it is transferred to cardboard. So you simplify for yourself cutting separate items. To create owls, we will have to make eyes, a torso, which includes feathers, wings and tail. To make it easier for you to cut metal parts, you can use the grinder.

Creating eyes for owls, take care that they make large holes in which the bolts can be inserted. At all scales you have to create notches, thanks to which the effect of plumage will be ensured. To do this, you will have to take advantage of the chisel.

Paws can be done by connecting the piers of the rod with each other, using welding for this. To create the beak use a piece of bent metal. During the assembly of the product, the beak and paws must be welded at the very end.

When all the elements are in their place, the owl can be additionally decorated, by treating it with a special varnish.

How to make frost patterns?

The manufacture of frosty patterns is not very long procedure in time, however, it is capable of providing a fairly spectacular appearance of the product, giving it similarity with the old products of the masters. In many respects it contributes Manifestation of tin structure which looks like crystals. To make frosty patterns, it is recommended to use cans, since the tin layer is already applied on their surface.

It is possible to show the drawing as follows: This will require a candle, which needs to hold some parts of the metal for some time. Heating the bank must occur for a strictly defined time. If you redistribute it, it will lead to a damage of the product. The main goal that needs to be achieved during the heating of the tin layer is to give it to manifest.

Also make it yourself a frosty pattern made of metal, if you put the tin on the surface of the steel plate in advance, and then it Heat or melted .

For this purpose, the burner is suitable: thanks to a steady flame, you can easily heat the desired piece of tin. As tin heated, you can see how the shine occurs on it, which disappears after a few seconds.

Try to handle a metal sheet in such a way that its sections be heated unevenly, since otherwise you will get a single pattern.

To give the workpiece the original view by creating a unique pattern, it is enough to warm the sheet in the corners.

When the desired pattern is obtained, it is necessary to dramatically lower the temperature of the metal sheet. For this, it is dipped into cold water or splashes. In order for the desired pattern to be viewed on a sheet as clear as possible, the surface can be additionally treated with hydrochloric acid. For security it is necessary to prepare a tool - The wand to which cotton tampon ties .

Sometimes after warming up, it is not possible to achieve the required clearance. In this case, you can remove it once with sandpaper. It is not recommended to repeat this reception, since otherwise it will lead to a complete removal of tin layer.

For decoration purposes, you can also turn to wax paint, which is treated with certain parts of the metal sheet, after which they are heated. To ensure the durability of the drawing created on the bank can be by processing with a special varnish. It is even better if you apply a color transparent varnish on it, thanks to which your thing will look more original.

How is the cold forging?

The cold forging method can also be used to create metal products at home. With this technique, you can make things with your own hands with an unusual form, this is done with the help of the press. With a small metal thickness No need to resort to heating, it will help to avoid many difficulties.

Cold Forging Tools

  • Bentical, with which the bends of the workpiece will be performed to give the desired form;
  • Snail, which is also used to deform the metal sheet;
  • Special flashlight used for weave;
  • Wave allowing making wavy patterns;
  • Twister that allows you to twist the rods, thereby you can get spiral elements.

Stages of manufacture

  • Even before the manufacture of metal products, the forging method will not prevent Sketch or product scheme .
  • Then, using the existing tools, proceed to the manufacture of components of the product, and subsequently they are connected to each other with welding.
  • The last stage of the manufacture of metal products by the method of cold forging is the elimination of seams, grinding and applying special varnishes.

Above the most common options for cold forging, however, it can be performed and somewhat different way in the form of chasing.

To take advantage of this method, there is no need to purchase Special complex tools . The basis of this technique is working with the workpiece, which causes a predetermined pattern by extruding the metal. After the sketch of the pattern or image is prepared, it must be cut.

Then you need to take care of the presence of a material bend.

After that, the board is covered with a layer of resin, where you already lay out the finished billet. From that moment on, the process of its design begins by transferring the pattern to it.

Conclusion

However, as it is soaked for its skills, you can easily cope with this task, and will not be difficult for you create and more sophisticated things . This will allow you to turn your hobby into a fairly profitable occupation. After all, things that were made with their own hands are very valued.

  • Fedor Ilyich Artyomov
  • Print

A source: https://stanok.guru/stanki/metallorezhuschiy-stanok/izdeliya-doma-doma-iz-metalla-svoimi-zukami-na-prodazhu.html

Metal - magnificent material for creativity. It is not easy, as it may seem at first glance. Work requires certain skills and skills. Do not do without special tools and devices. But, the result received from work will exceed all expectations. Often get magnificent products that can be decorated with an interior of the house, a garden or a household plot at the cottage.

Consider several versions of metal crafts performed by their own hands.

Crafts that do not require special skills

Work with metal is difficult, but we picked up several options for products that are executed, with a minimum effort. But the fantasy is still needed here.

Crafts from thin-sheet metal

If you purchase a thin metal sheet, then work with sharp scissors. You will not need additional devices - you can make the figure quite easily. We offer a product in the form of owls. For its manufacture, you will need to buy:

  • Metal sheet, narrow stripes.
  • The substrate is a wooden rectangular board with a thickness of no more than 0.5 cm.
  • Carnations fixing elements.
  • Sharp scissors.

Sequence of performance:

  • It is necessary to draw in detail the sketch.
  • A marker (desirable to take permanent) transfer the pattern from the sketch to the metal sheet along the inside.
  • Sharp scissors cut items.
  • Take a tool with which you can squeeze on the inside of the metal of bulges or to read the grooves. A spoon with a rounded handle end.
  • You can take additional items, such as buttons or plastic parts. They serve as the eyes of birds, or additional decorative elements adorning finished products.
  • When the elements of the owls are cut, it should be embedded in one finished product.
  • The fixation of metal elements to the board is carried out with thin carnations.

Crafts with the child

If there is a strip of thin metal, then it's easy to work with it. Therefore, such manipulations can be attracted to the child.

Very easy to make snail band metal. To do this, cut off the desired length of the tape. Then start wrapping it into the spiral.

The body is also made of sheet metal.

The main difficulty in this case will be in fixing the body and the spiral house. But there will come to the rescue. If there is no possibility to fix hard, then you can use scotch. This is especially true if the metal sheet is quite thin and has no significant weight.

A question may arise how aesthetically brilliant scotch will look. It is even easier to solve this problem - it's enough to take acrylic paints and paint snail together with scotch. It is the layer of polymer coating that will allow you to hide all irregularities and additionally used materials.

If it is impossible to work with instruments, handicrafts should be chosen, including ready-made metal products that should be combined with each other.

Sophisticated products requiring skill and additional tools

If there is a welding machine, then you can make a craft from metal of any complexity. Nothing will limit fantasy and if you purchase scissors for metal. A small hammer with anvil make the process even more creative and diverse. In this case, nothing limits the skill of a creative crawler, nor the flight of his fantasy. Any idea can be implemented even using scrap metal.

Flat original designs

If there is a desire to make a homemade, which will decorate the household plot, the facade of the house or fence, you can perform a flat image of any animal, flower or other object.

In this case, you will need sharp cutting tools with which you can cut the image. The main part of the work will be to create a suitable sketch.

After on paper or dense cardboard, a suitable object will be created, it is necessary to transfer it to the metal.

Then cut the cutting tool not only the contour. But, preferably inner perforation. It is the internal holes in a flat sculpture that will help to recreate the image most naturally and give him some lightness.

With this method, you can create an original tablet number of the private house. If it does not suit the appearance of the metal, then you can decorate the product with a suitable paint.

A teenager can be attracted to such a work as a master class, especially if he has a desire for applied work.

Volume sculpture

If there is a sheet metal, you can make a volume sculpture that adorns the interior or garden plot.

The design is performed similar to the previous product. The difference lies only in the fact that it is necessary to cut several elements here, which are joined at right angles.

The main essence is to create a product having a certain thickness. It may be different, depending on the desire.

For a volume statue, you need to make two identical blanks. And then the billets of the end part, which will give the volume of the entire design.

When each element is cut from metal, they must be combined into one. It is done with welding. But you will need to show certain skills and skills. After all, rudely made seam can spoil the appearance of the finished craft. True, if it did not work out too neatly weld the elements of the structure, then they can be cleaned with grinders. True, it will take certain time and effort, so it is better to immediately do more and more carefully.

Option of bulk figure

The use of flat sheets connected at right angle insertion into the groove allows you to create a bulk model. The thickness of the groove must match the thickness of the metal. Additional fastening is carried out by welding in places of compound to give stiffness of the structure.

The toolkit for bending allows you to get away from linearity. Curved elements look like natural. The design acquires a naturalistic look. Staining is achieved by a variety and formation of a stylistic direction.

Fantasies of metallic crafts are practically not limited. You can draw different variations from the photo presented below.

Photo of the ideas of metal crafts

In 2014, we with my colleague at work, removed an empty garage. We had an argon welder, Bulgarian and a screwdriver. In 2018, we already had a workshop, a team of 14 people and eight desktops. We managed to build a business in the garage, production with minimal cost.

Subscribe to My Channel Telegram. All my drawings in one place HERE

Subscribe to the newsletter so as not to miss new articles and drawings:

IT IS IMPORTANT!!!

In this article, I will not be able to disassemble all the types of products in detail. Otherwise, the article will work out huge. For each product, I will make individual articles. The articles will be drawings, video, ideas on the topic - "Business in the garage, production" with minimal cost.

Therefore, if you do not want to miss these articles, subscribe to our newsletter, in the form below

Or subscribe to our group in VKontakte. All articles from the site there are duplicated

Since we were engaged in the production of metal products, then the examples will be from this area. Learn to cook not so hard, at least argon, black metal and stainless steel. Aluminum is difficult to cook, and the welder is more expensive for this. Well, if there is money, it is better to buy an aluminum apparatus inclusive.

In the garage you can make the manufacture of anything, the main thing is that the garage area allowed. Therefore, products for sales need to be chosen small.

What to do

I propose to produce metal products.

I led the three main directions that I will disassemble.

  • Products for garage
  • Classic, small, popular metal products
  • Steam Punk and Loft Products

Business in the garage on bicycles for motorcycles, production.

Business in the garage. Arc protection

Already wrote an article and remembered the promising direction. In this direction, I had the very first attempts to build our own production.

This is the direction - Motorcycles !!! Every year bikers are becoming more and more. And on this topic, the welder may not start.

I have already written the first Motorcycle Article. Link to it below.

Products for garage

These are products that can be used in the garage. Mostly these products serve to save space in the garage. They will allow raspiens on the walls, bicycles, tools and wheels.

The idea is that if you work in the garage array, then the clientele will be in the neighborhood.

Raduce or overpass for passenger car

Business in the garage
Business in the garage

Drawing of overpass

I stroked the overpass from the picture of the past paragraph. He died on the eye, I myself did not do this flight, I will not give a guarantee. The strength characteristics need to be checked on the fact of production.

Download drawing

In the picture above you will not see anything. Therefore, you can download the drawing in PDF and SolidWorks format below by clicking on the button.

Download drawing

Wheel Placement Products

Various product options allowing saving wheels

Bracket for one or two wheels, mounted on the wall. Make easy.

Business in the garage
Business in the garage

The topic of racks is quite relevant, since the racks produced at the factories are quite expensive. Mini racks for wheels. Do not necessarily repeat the racks. If there is no pipe bending, turns can be replaced with welded turns.

Business in the garage on racks

Shelves are also collapsible, it makes it easier to transport.

Business in the garage rack

Outdoor horizontal stellage , drawing

Drawing of the floor horizontal rack on four wheels. So, I ranked the shelf on the rack, under the tool or other trash.

Business in the garage on wheel storage

Shellage with shelf

Business in the garage on wheel storage

Shelf

Business in the garage on wheel storage
Download drawing

Vertical stellage , drawing

Four wheels rack

Business in the garage on wheel storage
Business in the garage on wheel storage
Business in the garage on wheel storage
Download drawing

Ceiling rack, drawing

Business in the garage on wheel storage
Business in the garage on wheel storage
Business in the garage on wheel storage
Download drawing

Drawing of three-level shelving for wheels

Business in the garage on wheel storage
Business in the garage on wheel racks
Download drawing

Damage for garage

Chipper for the wheel

Dumps for doors

Various brackets

Bicycle Placement Brackets

Business in the garage on storage systems

Brackets for brushes, shovel, etc

Foldable garage bench

Business in the garage on folding benches

Production of classic products as a business in the garage

Below are all known metal products. Products are relatively small. On their basis, it is quite possible to open a business in the garage, since production does not require a lot of space and with minimal cost.

Benches can be performed in a garage without complex means of production. Manufacture of fairly interesting benches can be produced.

  • Bench drawing
  • Drawings of bemark
  • Drawings of bemark
  • Bench drawing
  • Drawings of bemark
  • Bench drawing

I had kicked up on European sites and found some pictures of options for benches. For these photos, I drawn detailed drawings of these benches.

Drawings of bemark

You can download the drawings of the benches on the "Drawings of the Stamps" page, you can go to the page clicking on the button below:

Drawings of bemark

Coffee tables

At the moment I have drawn three drawings of coffee tables. Pictures of tables below.

Download drawings tables

Slive 1.

Article with drawing

Table 2.

Coffee table download
Article with drawing

Table 3.

coffee table
Article with drawing

You can also watch the video of 3D models of tables on my channel here

Swing

There are two options for drawings of one swing, one-piece which will be laid in the ground and collapsible with mortgages in the ground

  • Drawing swing collapsible
Article with drawing

Railing, stainless steel fences

On this topic, I dedicate a rubric Railings and fences Go to category .

At the moment, in this category three articles.

One article about which production to open, nuances when opening small production Article

Two stainless steel processing articles, grinding / polishing / satin Article

Subsequently, this section will have articles with video, with a step-by-step manufacture of exclusive railing. Articles on the creation of a test site on this topic and with setting up advertising on the site.

Railie from stainless steel business in the garage

I found a couple of dozen photo railing from European manufacturers. Select several options and start copying them, I will write copies to the video. I will make a mini space booth to which I will mount the railing. So the railing on the stand will need to take a picture, the pictures will go to the future test site. If you decide to make a railing, you can use my pictures for your site.

In general, the rubric "Railings and Fences" will be a ready-made case on the opening of the direction of production on the railing.

Water tanks

Article "Water tanks" already exist by reference

Business in the garage on water tanks

Small canopies can be done in the garage conditions.

In the picture below, the main types of visors. With radius canopies there will be problems due to bent items. We'll have to look for a gingerbread or buy pipe bender. At first, it is possible and not to offer radial canopies.

Business in the garage on the visors

Download Drawings Visrats

Below you can go to the pages where you can download the drawings of the visors

Visor drawing 1600x960 (Arch)

Business in the garage on the visors

You can put on the drawing page by clicking on the button below.

Article with drawing

Download Drawing Visor 1200x960

Business in the garage on the visors

Article with the drawing below

Drawing visor

Pipe bender

Today I am engaged in the development of pipe bending. The drawing of the pipe bending can be found in the "Drawings" heading

Drawing Trubbing Business in the Garage

Lattices on the windows

To date, not a popular type of product. But periodically slipping.

Business in the garage on the lattices for windows

Alternatively lattice with forged elements. To date, many organizations trade for adhesive elements and inexpensive.

Fences from Covanina

As I wrote above, it is not necessary to be a blacksmith, to make forged products. Variants of forged railing set, from simple to very complex. Measure the stairs, buy elements, weld, paint or paint customer.

Business in the garage lattice

Welded frame for the porch. There and Perila

Most of the "self-employers" of private houses are trying as much work as possible in the house under construction independently. The porch will not be an exception. The house owner will be cheaper - separately order a skeleton of the porch in the garage, on your own to paint on your own, independently mount, buy steps and fasten them. After the same welder it is possible to order a railing. And if this customer contact the company, he will pay the measurer, accountant, manager, for the logistics, rental of the office and the company's workshop. Plus cheating of course.

Business in the garage on the porch

Columns for fences on a straightener and grid Rabitsa

With this option you need to monitor competitors in your area. Last time the demand for this type of product is large, therefore a lot of competition has appeared. Competitors can have a very low price. This topic was actively connected to metal supplies whose advantage in the price of the pipe, because Wholesale.

Business in the garage on the columns for fences

Business in the garage on welding

Welding work by yourself - will always be in honor. Especially in the garage array. Especially if your welder cooks aluminum and you respectively. Also, the departure has not been canceled.

Business in the garage welding

Ramps for disabled

On the topic of ramps for disabled people already have an article

The main work in the production of ramps is not in the garage. In this case, it is necessary to find production where there is bending and cutting of the metal (you can plasmorez). The main work in the garage is the build of the ramp and the drilling of the crossbar between the polls of the ramp.

Business in the garage on ramps for the doofers

Drawing of perekat ramp

Sizes 400x400x800x40 mm

800 mm width, 400 mm rods and threshold height 40 mm

Pardus drawing
Download drawing

Handrails Wall-mounted

I do not know if anybody makes the handrail from the black metal in our time. In my opinion, only stainless handrails are everywhere. The simplest handrails from the stainless steel do not require welding, all the national team.

But such rules are not very unreliable. Therefore, I advise you to purchase an argon apparatus, at least in stainless steel and chernukha. Ideally, of course, the aluminum cooked.

Ballet machines

Metallic part of ballet machines is not difficult to make. Handrail from a 50mm tree is not easy to find. The sleeve of pipe with a diameter of 57mm, the inner seam must be drowning.

Business in the garage on ballet machines

Loft and Steam punk as a business in the garage, production

Loft

Interior style which last years is gaining popularity in the CIS. In fact, the Loft interior is not new, but even old. And at the same time, the metal part is simply made. The complex side of the Loft furniture is the bore.

Production with minimal cost will not work, because wooden elements are expensive. But such things are made under the order and prepaid. To date, such furniture is quite expensive, but garage masters with low prices appear. Why don't you become one of them. Production of Loft products, this is a great idea for business in the garage.

Production Steam punk products like business in the garage

This is more creative activity, the style is similar to the previous loft. But Steam Punk has a deeper idea. It is not worthwhile to invent products, if you are certainly not a fan of this topic, you can copy. Below examples of products in this style.

Read about the steampunk, to understand the foundations for the manufacture of this product.

The disadvantage of this style is that it is difficult to find a client. The topic is not very popular yet.

My contacts

If you have questions, write !!!

On mail [email protected]

Or shape.

After filling out the form, press the inscription Send. !!!

Write me in social networks. Links to the menu to the right of the article if you came from the computer. And at the top of the site, if from the phone.

52vote

Rating Articles

Metal products do it yourself for sale

Metal products do it yourself for sale

In modern conditions, when the market is overflowed by goods of mass production, handmade products begin to use in great demand.

Specialized departments and whole shops or salons are beginning to appear in the cities, which sell exclusive things made by craftsworn masters.

If you want to present an unusual gift to someone, the best option will be made of metal, do it yourself, although there are many other souvenirs in the style of Hand Made.

Exclusive handmade

Execution techniques can be so diverse that the product range affects the imagination of even a sophisticated person. Most often, such souvenirs are purchased to decorate the interior or as a gift. You can buy or order the following things:

  • Frames for the photo;
  • objects of dishes and life;
  • clock;
  • clothes elements;
  • Jewelry.

Products can be performed in such techniques:

  • decoupage;
  • ceramics;
  • Art forging and casting;
  • Fusing;
  • batik;
  • Crochet;
  • Beadwork;
  • embroidery.

It all depends on the fantasy and technical equipment and the abilities of the authors. Among customers with great financial opportunities are specially popular with artistic products made of metal.

Scope of application

Objects made in artistic casting and forging techniques are used to decorate elements in various design spheres:

  • architecture;
  • furniture;
  • sculpture;
  • eaves;
  • bales of stairs;
  • fireplaces, stoves, mangals;
  • Jewelry and jewelry.

Decorative metal items effectively complement any interior, giving it a certain chic and luxurious style.

Want to learn how to perform metal products with your own hands? Photos of such items fascinate beauty. All things look very elegant, and most importantly - keep the heat of the author's hands. That is why such products are quite expensive. True style connoisseurs are ready to pay well for exclusive.

You can perform various metal products with your own hands. Such techniques use such equipment to process this material:

  • forging;
  • stamping;
  • cutting;
  • bend;
  • Diffoff;
  • chasing;
  • filigree.

Objects that can be made by these methods are very diverse. Masters do:

  • bracelets;
  • earrings;
  • rings;
  • suspension;
  • belt;
  • caskets;
  • Flowers;
  • decorative vases;
  • interior decorations;
  • Elegant plates for fruits or candies.

Metal products are simple enough. The main thing is to know the stages of the process and have the necessary equipment. For the production of complex things, it will take a lot of time and expensive devices, and some souvenirs can be made practically from nothing.

It all depends on what you are going to do this. If you choose artistic metal processing as a sphere of professional activity, then you should be patient and realized that some financial investments will be required.

For the manufacture of simple, but original gifts, friends, relatives and acquaintances will only need a desire and prerequisite.

Manufacturing technologies

You will be quite able to create metal products with your own hands. Photos of the drawings and stages of the process will help you with this. Artistic work involves stages for molding, processing and finishing. The manufacture of things, as already mentioned, occurs in different ways.

  • Under the casting is understood to fill the shape of a liquid alloy.
  • The forging is plastic processing of the material with a hammer, a press, as well as bending, twisting, cutting.
  • Bending is a simple form of the previous version, which is performed by slurring or welding parts of the product.
  • Diffoff is a method for treating a thin, no more than 2 mm, a metal sheet with a hammer blow, thanks to which it acquires the necessary configuration.
  • Stamping and cutting prepare individual elements, make holes.
  • Filigree makes from twisted or smooth, sometimes flattered copper, silver, rarely gold wire. The curved parts of the patterns solder.
  • In case of chasing, the embossed pattern is obtained using stamps or special tools that have between the hammer and the product.

Metal product drawings can be performed manually or in special programs on the computer. Three-dimensional modeling allows not only the usual drawing, but also to build a bulk model of the future product. It makes it possible to see the appearance of things, including in the interior, long before its real appearance. In this case, it is possible to adjust the parameters of the product without material costs for re-manufacturing.

How to make a casket from aluminum can

The most elementary thing from metal can even perform a schoolboy. The main thing is that this will not be required practically nothing but time, hard work, fantasies and desire to create. You can make a beautiful casket from a regular jar from the soda.

Materials and equipment

Raw materials for production, you can say, lying on your feet on the street. You will also need the following items:

  • sandpaper (skar);
  • sharp scissors;
  • line;
  • pencil;
  • ball pen;
  • solid base format no more than A4 (depending on the size of the box);
  • Sheet of paper for the scheme.

A source: https://steelfactoryrus.com/izdeliya-iz-metalla-svoimi-rukami-na-prodazhu/

Metal simple things

If you do not have experience in making such things with your own hands, then you are recommended to start with the creation of the simplest metal items. Such can perform a metal box, which can act as not only with a decorative element, but also to perform practical functions.

Required tools

As the basis for her suitable Normal Tin Bank . To make such a casket, you will need to prepare a number of instruments:

  • Sandpaper;
  • Scissors;
  • Line;
  • Pen and pencil;
  • Solid foundation that will be used as a working surface;
  • Paper that will serve as a basis for drawing drawing.

The process of manufacturing do-it-yourself caskets from cleaning the surface of a paint can Use sandy paper . It is advisable to perform an operation when the bank remains still filled. Otherwise, it will have to do this preparation as much as possible, because if the metal is deformed, then you can hardly make a beautiful casket.

After that, you begin cutting banks: it is necessary to do this in such a way that the billet is rectangular shape. Prior to this, it is necessary to cut off the bottom, after which the upper part is cut along. In the process of this operation, irregularities will appear on the edges, which are desirable immediately to appeal.

Next, it must be placed on a solid surface, where the images contained in the drawing are already applied using a pencil. After that, they start directly to the creation of a pattern. You will not have restrictions in the choice of decoration for the box, but it is advisable to still use symmetric details.

To create a pattern The ballpoint should be required . With the help of which you can easily sell aluminum. It is possible to achieve a pronounced effect of pronounced texture if you spend more than once along the circuit lines. By completing the stages listed above, you will only need to assemble the casket.

If there are welding equipment and the skills of handling it, you can make with your own hands a very beautiful metal owl. In addition, you will have to Prepare the following tools:

  • Paper;
  • Pencil;
  • Cardboard;
  • Scissors;
  • Thin metal;
  • Bulgarian;
  • A hammer;
  • Chisel;
  • Welding equipment;
  • Washers and bolts;
  • Steel bars or wire.

At the first stage it is necessary portray on paper sketch owls . After that, it is transferred to cardboard. So you simplify for yourself cutting separate items. To create owls, we will have to make eyes, a torso, which includes feathers, wings and tail. To make it easier for you to cut metal parts, you can use the grinder.

Creating eyes for owls, take care that they make large holes in which the bolts can be inserted. At all scales you have to create notches, thanks to which the effect of plumage will be ensured. To do this, you will have to take advantage of the chisel.

Paws can be done by connecting the piers of the rod with each other, using welding for this. To create the beak use a piece of bent metal. During the assembly of the product, the beak and paws must be welded at the very end.

When all the elements are in their place, the owl can be additionally decorated, by treating it with a special varnish.

How to make frost patterns?

The manufacture of frosty patterns is not very long procedure in time, however, it is capable of providing a fairly spectacular appearance of the product, giving it similarity with the old products of the masters. In many respects it contributes Manifestation of tin structure . Which looks like crystals. To make frosty patterns, it is recommended to use cans, since the tin layer is already applied on their surface.

It is possible to show the drawing as follows: This will require a candle, which needs to hold some parts of the metal for some time. Heating the bank must occur for a strictly defined time. If you redistribute it, it will lead to a damage of the product. The goal to achieve during the heating of the tin layer is to give it to manifest.

A source: https://masakarton.com/izdeliya-iz-metalla-svoimi-rukami-na-prodazhu/

Cold forging

If you have a press, you can do cold forging. With it, you can create more interesting and attractive designs for the decor. This method is simple, but for it requires special tools that will be found not from every craftsman:

  1. Bluck for performing bends.
  2. Snail for deformation of the iron sheet.
  3. Lantern for weave.
  4. Wave for making wavy patterns.
  5. Twister for twist the rods among themselves. This will allow you to create spiral elements.

As in other cases, the first thing is prepared a sketch or scheme. After the stage of manufacturing elements of the overall design is begins separately. As in the case of the owl, the welding will be welded for the final association of all parts.

Now all the seams are eliminated, with the help of sandpaper, the whole design is grouped, a special varnish is applied at the end. Design ready.

As you can see to decorate your home or cottage, it is very necessary to buy expensive decor elements, sufficiently a little effort for the invention of your crafts. Of course, if you do not have at least minimal skills to make such structures, everything will be not so simple. But starting with simple options, it is gradually possible to achieve serious heights in this craft.

Safety technique

Work with metals requires caution and safety. Sheet material and jar on blanks can cause cuts, and therefore it is necessary to use gloves

The workplace must be convenient, the details must be correctly fixed to eliminate injuries from their fall. Apply only high-quality tools and reliable equipment.

Special caution requires the implementation of welding. When they are required, the protective equipment is used - mask or shield, protective suit, dense mittens or gloves

The place must be equipped with reliable ventilation.

Special attention should be paid to fire amendments. First of all, the neighborhood with easily flammable materials is not allowed, and at hand there must be fire extinguishing

It is quite dangerous any event for processing and cutting metals by rotating tools and equipment. It should be remembered that the blanks can warm up significantly, and the metal chips are flying away at high speed. Protective covers should be provided, the eyes must be closed with glasses.

Patterns that do not melt

The most common type of decoration of items from metals is the creation of patterns by methods of hot and cold forges. They look both in the design of facades of houses and products for the garden.

Details of the drawing are performed separately, assembled by a predetermined pattern in a large value. Molding is carried out using welding or clamps.

Patterns made of metal for decorating choose different motifs. Architects distinguish the following styles in forging:

  1. Gothic - presented with sharpends with sharp silhouettes. It is characteristic of it - shaded, spikes, lilies, accurate geometric shapes, as well as spaces, when one rod permeates the other.
  2. Romanesque - dense patterns of curls and bending branches, square cross section. The most recognizable detail is a matter of the trunk, from which branches are diverged.
  3. Renaissance - rounded shapes in combination with cast figures. It highlights two independent styles - Baroque and Rococo.
  4. Baroque - for kings. Pumping and intricateness. There are flowers, spirals, curls.
  5. Rococo - does not have large elements. Patterns are transparent and air.
  6. Classicism - broken lines intersect at right angles. Drawings are detained and symmetrical. No curls.
  7. Modern - Abstract forms prevail. May include oriental ornaments. Contains a large number of curls.
  8. Hightec - the youngest style. It is characterized by geometric strict foors, lack of smooth lines.

Finished forged products are covered with paints for metal, highlighting individual elements with different colors. Today, the craftsmen learned to paint them with the help of temperature processing in the manufacture.

Different metal patterns

The scale of colors of passion from yellow to purple is used by blacksmiths when determining the heating temperature of the metal. The color manifestation depends on very thin, in several molecules, oxide film on the surface. Modern masters have learned to control the colors of the metal, and use it when designing the product.

Caution Colors Steel

The temperature also helps in the creation of frosty patterns from tin. Based on the principle on its allotropic forms. Under normal conditions, it is white and called β-form. Heated to a temperature above 160 ºС, transitions to a substance with a different crystal lattice - γ-form.

In practice, the following happens:

  • The sheet of tin cans covered with a thin layer of tin, bring candles to the flame and warm up;
  • In places to increase the temperature there are divorces, which diverge in different directions of curls.

In this process there are nuances:

  • Uniform warming of the entire sheet will lead to a change in its color without divorce;
  • Quite point heating - divorces are formed in an arbitrary direction independently;
  • Overheating of the surface will lead to a laying of tin - its melting point is about 232ºС.

Nevertheless, the effect is beautiful and easy to do at home. The sheet painted in this way can be used to create crafts from tin with their own hands.

Example of work

The original idea is the creation of a metal owl. To do this, you will need a stencil or a pattern that can be made of paper. It is applied to it. The drawing is cut, applying to a steel sheet.

Owl is cut off by a grinder. Eyes are performed by drilling holes. If the body is created, you can go to detail:

  • Frecks are performed from the rod;
  • Appeal irregularities rich with a grinder;
  • Owl is processed by a special means of rust;
  • Metal paint.

Initially, 30 rose petals are cut on metal scissors. In the process of cutting, it is recommended to move from 15 to 80 mm. For petals to be smooth, a grinding stone is used. Since the basis of bud is ready, it will be necessary to twist the steel cable in the spiral. For this use pliers. Alternately welded petals to the trunk. If the flower is ready, the spikes fix the welding machine. Seams and surplus are cleaned with a grinder. The rose is covered with protective paint.

Butterfly and patterns

Steel wire allows you to make figures of different sizes. For example, you can make a butterfly. Experts advise the use of medium thickness for this. Such material is bent without problems. Due to the spiral turns, the body is created. Separately perform wings of two ovals. The last elements are fixed to the body.

Step-by-step execution with your own handicrafts from sheet metal with galvania using a welding machine:

  1. Execution of the thumbnail of the entire product and its elements.
  2. Transfer patterns on raw materials.
  3. Bulgarian cutting.
  4. Protection of edges.
  5. To create the image of feather with a hammer and chisel applies a notch.
  6. Formation of the beak and the remaining parts of the body.
  7. Connection of elements among themselves.
  8. Cleaning the metal surface from rust.
  9. Laccurate.

Flowers and leaves

The floral ornament will originally decorate the lattices on the windows, the fence. With the help of a bouquet of roses, you can independently decorate the room. To make branches, flowers and leaves, a hot and cold forging is used.

Stages of work on the latest technique:

  1. Cardboard cutting leaf sheet fit.
  2. Transferring the image to the metal.
  3. Cutting sketch and grinding edges.
  4. Elimination of "skeners", cleaning and grinding the surface.
  5. Application lived on raw materials.
  6. Subtle execution of petals by beating them with a hammer.
  7. The bending of the edges of the Rounds.
  8. Fixation of finished forms on the branch.
  9. Staining the finished product.

So that patterns and flowers are durable, use steel of medium, soft and solid grade. Specialists advise you to use raw materials with 0.25% carbon. In steel should not be phosphorus, chromium and sulfur. Original ideas for giving from scrap metal Experts consider the following:

  • Barrel is cut along. Inside the shelves are installed, and to the bottom - wheels. The resulting wardrobe can be used for storing small things.
  • For the manufacture of a coffee table, it is recommended to cut a barrel across.
  • If the walls of the barrels arrange openwork threads, building a headset for lunch, you can make a table and chairs.
  • To create fabulous characters, use unnecessary garden equipment, pipes.
  • In the country, installed furniture made of profile pipes. Raw materials are considered practical, inexpensive. It allows you to create different things: a greenhouse, furniture. Pipes are perfectly combined with plastic and wood.

The original solution is to make a bench from the profile pipe with a cross section of 0.03x0.03 m and a length of 11 m. Boards with a length of 2.3 m and a width of 0.06 m are required. In the presence of features, a greenhouse is built.

To create toys or jewelry, you can use old things. Tin and aluminum are considered soft metals. It is convenient to use for the manufacture of dragonflies and other animals.

Snail: A simple tool for creating curls

The second name is the conductor for the cold forging with his own hands. For manufacture, you need to get acquainted with the flexing process, for example, watch video forging. Then the design itself will not cause questions and will be easy to repetition. The workbench is a bird on which the main matrix or spiral module is. Prut rushes into the snail and costs a metal roller, pressed against the arc. The frame should be made of metal, as the tree after a long voltage is quickly destroyed. For this purpose, a metal corner is suitable, a thick-walled pipe or a chamber.

The machine is designed for two countertops. One fulfills the function of the support and takes on most of the pressure, and the Snail shape is placed on the second. Two circles are cut with a thickness of at least 5 mm. The first part is installed on the frame. The center of the circle is planned from above, a three- or four-dimensional leg for the load distribution is welded.

The upper part of the snail on which the metal bends is called the module. It can be static or typical.

Snail tool calls to create curls from wrought metal.

The static module is a cold forging device, designed to flexing the same type of pattern details. Change the radius or bend angle cannot be changed. Before starting the formation of the module on the tabletop drawn markup. From metal plates (no less than 0.6 mm thick), snail is recruited and welded.

The set module consists of several parts. Its use is the most common for art forging with their own hands, as it allows you to create elements of different radius. Initially, the markup is drawn on the table top and the grooves are calculated. From thick metal, removable parts of the snail are cut. Holes for consolidation on the table top need to cut through in the middle only. Otherwise, the voltage is distributed unevenly and the groove breaks faster.

Module for forging with your own hands can be done replaceable. The design of the required radius is welded on the metal circle. She attaches with grooves or bolts to the tabletop. To make elements of different diameters, make several modules that can be used on one machine.

A set module will allow creating curls of various radius from wrought metal.

Between the countertops you need to fasten the rotating shaft and lever. It is necessary that the distance between the roller and the module is at least 2 cm, and the shaft move should go beyond the table top. A movable element is installed on the knob of the lever to adjust the roller stroke radius.

Metal Sculptor Metal

The time, children, especially the boys, will bend nails, make crafts, as once out of matches. Cut metal with metal with metal. Chisel cut. Soldering a soldering iron.

">>"> ">"> ">

Weld welding. Find out a split brass tube in water. And so that one day one of them was able to do one of different parts and parts is one whole - a unique monument of architecture. Metal surreal sculpture. And let the sculpture of the metal, not everyone will understand. The main thing - he will make it. Heavy construction, which is all of the metal. On a metal pedestal - horse. And on horseback rider in the saddle. Monument to the rider - this sculpture will be called. It is only necessary to want, the sculpture will be created. Because the boys in labor lessons in high school has already comprehended the primitive knowledge of the knowledge of the metal.

  • https://stankiexpert.ru/tehnologii/izdeliya-izdeliya-iz-metalla-svoimi-rukami.html.
  • https://podelki.pro/podelki-iz-metalla/
  • https://stanok.guru/stanki/metallorezhuschiy-stanok/izdeliya-doma-doma-iz-metalla-svoimi-zukami-na-prodazhu.html
  • https://svoimirukamy.com/podelki-iz-metalla.html
  • https://podelki.guru/podelki-iz-metalla
  • https://clubsamodelok.ru/podelki-iz-metalla/

Other killing

To train a novice welder, this is what the design can be performed. Deer. Metal rings. Metal rings are taken with a diameter of 5 - 6 cm. And on Earth begin to weld them to each other.

Here you have to have rich figurative thinking. To create one side of the moose, do not forget to start the elevation of the body in the elk. Apply better for this brick debris. So to weld the rings, gradually raised the body of the moose, which lies on the side on the soil.

But the result is amazing. When the moose is put on his feet. Openwork head, a volume model of the body, an elk horns - everything is clearly and simmary. Such creation can even take the exhibition.

Product technology

Creating crafts from wood and metal today is considered to be a modern way to make money. Metal designs performed by hand, decorate the eaves and benches. At the same time, the master has the right to choose the desired style suitable in the house.

In stores, metal objects are expected expensive, because they are produced manually. Therefore, today it is relevant to create similar products yourself.

For the manufacture of metal parts and patterned images, it is recommended to choose the appropriate work process.

Metal is the material, which creates entire compositions of various crafts for home and garden. In this regard, many ways have been developed, thanks to which the house is really creative.

Everything has its time

Such crafts from thin metal can be done already in grade 5. Everything else, crafts with welding, as well as with work related to drilling - boys are mastered in high school.

You can bolts, nuts, washers to connect and twist the wire. Collecting them in a certain way, you can get a horse shape, wolf, a man.

Working with wire gives a big scope of children's creativity. Especially soft wire with a fever. There will be no RAS, no injuries in children. Therefore, a safe way to create crafts is very important.

Starting from grade 1, work with wire is welcome. Unlike heavy and solid metals. Why are the rapid, inexperienced children give to work with metal dwarves? So do not give. And it is right.

Crafts for cottage from metal.

Over time, any summer house accumulates all sorts of glands, or these are old garden tools, whether the desired pieces of metal, which and throw out a pity and apply nowhere. From all this metal you can make wonderful crafts for giving.

Such country crafts can be made of old garden tools, pipe trimming and all metal, which is found from each owner in the barn.

The best way to fasten such crafts is welding, although for different designs it can be other methods of fastening.

See what character in this funny feature for a garden made from unnecessary metal cans and old springs.

And this "master dog" is distinguished by a special basis and friendliness.

As already mentioned, crafts for a metal garden can be made without welding. For example, this openwork panel from the wire is made on a metal frame of thick wire, to which the fine wire is fixed the entire image. Maybe this is a garden nymph, and maybe the owner of the manor.

Garden crafts from stainless steel look more accuracy and do not require regular care, but they are more complex in the manufacture.

For the most bold: a grasshopper-mailbox, can not only surprise your good friends, but also scare the uninvited guests.

Our fantasy is amazing - this is a piglet, or a puppy who will give us in the depths of the garden, is charming and causes a smile.

DIY for the cottage from metal require not only the presence of a suitable material, but also the presence of your free time. Do not regret that in vain spend time on the manufacture of garden figures, instead of painting the fence.

Ideas for cottage from metal - what to turn the old bike

If children grew up, you have these means of movement, let them in the case. Even with time, bicycles may be unusable, but if desired, they will become indispensable for giving.

Even if only part remained from these mechanical things, they still go into business. And you can not paint here such a rusty bike halve. It is enough to attach a kashpo with flowers as this art object will turn into an unusual flower lamp that will only have you.

If you wish, then Okarite rust sandpaper, then cover the old paint bike for metal in 2 or 3 layers.

But without painting, such a flower girl looks good, it looks like an old art object.

If you have a lot of metal wheels from the bike, then for the cottage, do your own hands from the metal of this type of very useful devices.

Take:

  • Bicycle wheels;
  • wooden bar;
  • stones;
  • shovel;
  • antiseptic;
  • stretch film;
  • scissors;
  • Wire.

Stick up next step by step instructions:

  1. Drop the deepening in which you could put a wooden bar in one end. So that he does not rot, first paint it with an antiseptic in several layers. When dried, wrap the edge, which will be in the ground, stretch the film in several layers. It will not give him to rot from moisture. Such a job is convenient to produce together. One will keep this column, and the other will pour out small stones and tamper them. It is convenient to make a small wooden bar or hammer.
  2. If you have cement, prepare a solution from it by adding water and sand. Fill this mass to this deepening. If it is not, then just pour it off with tight soil and well compact.
  3. If you used cement, then give him time for drying. After that, it's sewing a part of the wheel protruding above the surface of the pillar, placing them one above the other. And you can bind them with wire.
  4. For such a support, cucumbers and other plants that love to grow vertically will be good. But placing the wheels at such a height so that you can get a crop. Also here you can plant the curving beans, which will turn this support, will close it, and you can first admire the beautiful flowers, and then disrupt a lot of fruits.

Also, the old bike will help embody the following idea. If you want to make the original gate, do not know how to fill it in the inner part, then attach the bike with the help of clamps and wire. Such an idea will certainly cause a smile with everyone who will come to your house or just pass by.

If you have a lot of bicycles, then create fences from them. It is necessary to put these three vehicles vertically and fix them with stakes into the ground, it is better to use metal. You can pre-paint the old bikes in one or different colors to get such a merry fence.

The next original thing for the cottage is also done with their own hands from the metal. You will take it from the bike. Secure the wheels one over the other on a wooden fence, and the cucumbers will grow here well. After all, they have a good support, and the fence will protect the screens from the wind, so the yield will have high. But you need to put them in a well-fertilized organic soil and periodically feed. And if it grows it, then you will throw Loutrasil to the top wheel, downstairs lock it with stones on earth and cucumbers will warm.

If you have accumulated a lot of wheels from bikes and cart, then you can make a fence of them.

And the work will be reduced to a minimum, since these billets do not even need to be painted. The main thing is to arrange them in such a way as to close the space and bind over each other.

Basic principles of cold forging

In practice, a cold forging with their own hands is not a time-consuming processing of metal with several complex stages and the use of special equipment that consumes energy resources in a huge amount.

As rated materials, in the process of working with a machine, you can use various metal blanks, for high-quality forging and creating unusual, original products are often used:

  • Metal rods of different diameters;
  • hollow steel tubes with a small thickness;
  • narrow iron strips from different steel grades;
  • Construction fittings prepared for processing.

Simple equipment can be quickly mastering, with it, it is flexing with a steel rod into manual, manipulating levers, or due to an electric motor that significantly reduces material processing time and improves the convenience of operation of the machine.

Fastening pattern elements: Last Metal Processing

After all the necessary elements of the ornament are created, its formation begins. The appearance of the pattern may differ slightly from the sketch. To determine possible errors, you need to preview. Initially, the pattern can be put on a flat surface without fastening it. Thus, it is possible to estimate how much we managed to implement the idea of ​​life, as well as correct the shortcomings in your work. It is not worth starting to form a pattern without previewing the result.

Products look more intelligently if the elements are connected by welding.

The main types of compounds are two:

  • Weld;
  • Rivets (or art clamps).

The welding machine is useful to use in those places where the joints of the connection can be easily cleaned or it will be impaired. To preserve the aesthetics of the ornament, it is possible to put curly rivets. They reliably fasten the composite parts and complement the decor.

The ornament is combined gradually, depending on the number of parts. Initially fasten small elements, form spaces, twisted lines and monograms. Apply welding. The seam is equalized by a grinder using a slight circle with a thickness of 0.6 cm. It is easily bypassing bends and irregularities. Large parts are combined with curly clamps. Rivets put symmetrically to each other to supplement the pattern. At shutdown, the ornament is circulated by a credit or polishing circle.

Cold forging allows you to create beautiful and original products with your own hands.

Artistic forging is not only a business or work, but can be an entertaining hobby. Equipment of cold forging with their own hands can make even a novice master of girlfriend. Cold forged specialists can be bolded by artists, as they create beautiful ornaments from rough rods, pipes and sheets. Similar hobbies require complete returns and considerable costs. However, all invested funds and efforts will bring their fruits if they are supported by the desire to create a beautiful.

Metal products do it yourself for sale for home

Why don't you do such activities in your own garage?

Ceramic products

Do not know what can be done for sale yourself? Open in the garage or any other utility room a small pottery workshop. Original statuettes, vases and other dishes made in limited quantities are in great demand in the market.

Of course, you will have to spend a certain amount for the purchase of special equipment and procurement of materials. But you can quickly return all the initial investments, since the payback of such a business is high enough. According to experts, this is the most profitable production for small businesses.

Finished products can be handed over in bulk in souvenir shops or sell on the Internet.

Other killing

To train a novice welder, this is what the design can be performed. Deer. Metal rings. Metal rings are taken with a diameter of 5 - 6 cm. And on Earth begin to weld them to each other.

Here you have to have rich figurative thinking. To create one side of the moose, do not forget to start the elevation of the body in the elk. Apply better for this brick debris. So to weld the rings, gradually raised the body of the moose, which lies on the side on the soil.

But the result is amazing. When the moose is put on his feet. Openwork head, a volume model of the body, an elk horns - everything is clearly and simmary. Such creation can even take the exhibition.

Fascinating predator

A spider of metal created by their own hands will transform your home and courtyard. It can be performed any growth. The proposed option is a mobile type. The product is small, autonomy, durable, resistant to weather changes and is quite suited. Recommended for location on lawns, roofs, trees.

Required component elements:

  • Bowling ball used;
  • renovation rod for concrete (approximately 6 meters);
  • washers and large metal screws (2 pcs.);
  • black tape;
  • duct tape;
  • Epoxy two-component resin.

For creativity need:

  • welding machine;
  • Scissors for cutting metal;
  • welder pliers;
  • Fixtures for grinding.

Ideas of crafts for beginner masters

Before considering ways to work with metals, it is worth staying on ideas and drawings of possible crafts.

Metal crafts - decorations for any interior. Popular animals and vegetable scenes, monograms, geometric shapes and national ornaments.

A simple product for beginners will be owl from metal. It is made by many ways. So, bent into rounded rod shapes, cooked with each other, form a wall-mounted colors in the form of an owl contour.

Owl made of metal with his own hands

Products from sheet metal with welding are made in this way:

  • Pre-on paper prepare a sketch of the product and its details;
  • carry the pattern on the metal sheet, carefully cut with a grinder and cleaned the edges;
  • chisel and hammer are applied notches so as to make the image of the feathers;
  • form the beak, the parts of the paws are cut out of the rod, and into the holes under the eyes, made by chisel in the head part - invent the bolts;
  • All bird details are welded;
  • The chemical solvent purify the surface from rust and varnished.

Plant ornaments decorate protective grilles on windows or fences, and the bouquet of iron roses can become an independent decoration of the room. Cold and hot forks are suitable for the manufacture of branches, colors and leaves.

Worn roses for windows

Cold forged leaves are created from thin metal 3.5 mm thick, which is well bended.

Briefly the stages of the process can be described as follows:

  • From the cardboard, the leaf of the desired form is cut;
  • transfer images to a metal sheet, cut out with special scissors;
  • edges are grinding with the machine;
  • "Sowing" is removed with a metal brush;
  • purified and surface surface;
  • the chisel applies veins on the sheet plate;
  • The edges of the leaves and petals make thinner, chopping them with a hammer;
  • With the help of round-heads, the edges are bent and attached to products;
  • Ready-made shapes are fixed with spot welding on the branch;
  • Color the product or covered with special varnish.
Worn hangers for umbrellas
Worn gates for fireplace with roses
Worn railing with roses

Vegetable patterns made by high-temperature forging are stronger due to the sealing of the material. Use medium, solid and soft grades of steel. The optimal are the steel grades that contain the minimum amount of carbon - 0.25%. And do not have in its composition harmful additives - sulfur, chrome, phosphorus.

For example, cutting the barrel along, inside the shelves, and the bottom - wheels. The outer side is painted with bright paint. And the locker is ready for the little things.

Locker from barrel

Cut across and painted, it turns into an unusual bedside table or coffee table.

The craftsmen design the walls of the barrels openwork threads, and then build a headset for lunch in nature: a table and armchairs.

Sades love furniture from the profile pipe made by their own hands. This material is practical, inexpensive, allows you to create many useful things: from furniture to the greenhouse. Combined with other materials: wood and plastic.

For the manufacture of bench with dimensions of 2.3x0.6x0.45 m, the profile pipe of the square section is used 0.03x0.03 m, a total length of 11 m. And also a boards with a length of 2.3 m, a width of 0.06 m.

Drawing of bench
Backbone

According to the above drawings, it is possible to independently make a bench with a back, as well as a greenhouse from the profile pipe with square and rectangular sections 0.2х0,2м or 0.2х0.4 m. Considering that the rectangular pipe is suitable for a solid frame, and square - for partitions .

Homemade Metal and Tree Shop
Wrought-iron

Metal details of old mechanical watches, coins, clips, tin cans, cutlery, wire - material for the production of toys or jewelry.

Aluminum and tin are soft metals, comfortable for making toys. To create a cat, dog, hedgehog, crocodile and dragonfly, you need a sketch to move to a sheet of tin, cut the shape and bend, as shown by dotted lines.

Sketch of animal from tin
Hedgehog Making Template
Sketch of dogs from tin

Добавить комментарий